Description

UNDER WING FOR MODELLISTA – JPY 95,000
Applicable year: For January 2022 onwards
・FRP gel coat finish, unpainted
・For vehicles with Modellista front spoiler
A plus-on spoiler that attaches to the bottom of the Modellista front spoiler.
Increasing the protruding and solid feel of the front creates a powerful low profile.
Note: Cannot be installed on standard bumpers

REAR SKIRT EXTENSION – JPY 120,000
Applicable model years: For January 2022 onwards
– FRP gel coat finish, unpainted
– For vehicles with Modellista rear skirts
This extension part attaches to both sides of the Modellista rear skirt. When a front underwing is installed, it lowers the ground clearance, making the rear view look well-balanced.

SIDE STEP EXTENSION – JPY 125,000
Applicable years: For January 2022 onwards
・FRP gel coat finish, unpainted
・For vehicles with Modellista front spoiler
An extension part that attaches to the bottom of the genuine side step.
It is installed over the genuine side step, emphasizing the aerodynamic feel without sacrificing ease of entry and exit.

REAR CENTER DIFFUSER – JPY 90,000
Applicable years: For January 2022 onwards
・FRP gel coat finish, unpainted
・For vehicles with Modellista rear skirts
An extension part that attaches to the bottom of the Modellista aero.
Large diffuser fins designed to balance with the vehicle body enhance the streamlining effect.
In addition, it adjusts the visual balance of the rear view when the Elford rear skirt extension is installed.

ROOF SPOILER – JPY 95,000
Applicable year: For January 2022 and onwards
・FRP gel coat finish, unpainted
・Fixed with double-sided tape and special screws

This is a spoiler that is fitted over the genuine rear spoiler.
It is a size larger than the standard version, and the lines that extend upward to the rear enhance the sporty feel.
By adding a moderate edge to the spoiler body, we have achieved a natural fit that looks like the genuine version. It can be mounted in a shape that faces upwards towards the rear, creating a sporty form.
The genuine high-mount stop lamp can be used as is.

OPTIONAL PARTS

UNDER GARNISH – JPY 95,000
Applicable year: For January 2022 onwards
・Carbon fiber *Twill-woven wet carbon finish
・For vehicles with Modellista rear skirt
When installing an Elford muffler, attach it to the bottom of the Modellista rear skirt to give the rear view a sporty feel. This creates a clean, unified look by blocking the opening of the genuine muffler.

TYPE X 4 PIPE MUFFLER – JPY 290,000
Applicable year: 2022-
・Muffler: Stainless steel
・Two types are available: for vehicles with Modellista rear skirts and for standard bumpers
*Standard bumpers come with a special bumper cover, made of FRP, gel coat finish, unpainted
・Complies with safety standards (muffler compatible with the replacement muffler pre-certification system)
*Rear towing hook must be removed
*The floor spare tire must be removed to install the muffler

This “4-pipe muffler on the left and right” allows you to install an impressive 4-pipe muffler not only on standard bumpers, but also on vehicles with Modellista rear skirts.
The tail end has a 2×2 arrangement of 120 x 85 mm square-shaped tail tips with beautiful polyhedral beauty. The genuine main drum is used, and only the rear piece is replaced.
The volume is hushed, so it is recommended for users who want to ride smart and stylishly around town.
In addition, the muffler complies with the new muffler regulations (compatible with the replacement muffler pre-certification system), so you can rest assured regarding vehicle inspections.

TYPE W 4 PIPE MUFFLER – JPY 275,000
Applicable model year: 2022-
・Muffler: Stainless steel
・Two types are available: for vehicles with Modellista rear skirts and standard bumpers
*Standard bumpers come with a special bumper cover, made of FRP, gel coat finish, unpainted
・Complies with safety standards (muffler compatible with the replacement muffler pre-certification system)
*Rear towing hook must be removed
*The floor-mounted spare tire must be removed to install the muffler

This “four-exit muffler on the left and right” allows you to install a powerful four-exit muffler not only on standard bumpers, but also on vehicles with Modellista rear skirts.

The tail end features a newly developed 113mm x 85mm oval-shaped tail tip arranged in a 2×2 configuration that emphasizes the oval feel.

The genuine main drum is used as is, and only the rear piece is replaced, so the volume is excellent and quiet, making it recommended for users who want to ride smartly and stylishly even in the city.
Furthermore, this muffler complies with the new muffler regulations (compliant with the replacement muffler pre-certification system), so you can rest assured regarding vehicle inspections.

Celestial [Brushup] – 300,000 yen / [Semi-gloss black/diamond cut rim] – 258,000 yen
Celestial is a wheel that does not spoil the car’s original performance, such as visual effects such as balance with the body size, practicality, functionality, ride comfort, and braking. It is 24 inches in size.
As a result of pursuing weight reduction, we achieved a weight loss of 15 kg per person. It made it possible to suppress the increase in weight, which was a disadvantage of large-diameter wheels until now. The commitment is thorough enough to use a lightweight aluminum air valve. In addition, a step rim (stepped rim) is adopted to achieve better ride comfort. We are pursuing a comfortable ride by increasing the strength and air volume in the tire.
Visually, it will bring out the best performance and bring you joy. Above all, it is made in Japan, which we were particularly about to reduce weight. It is one of the few Japanese-made forged wheels.
“Top-class wheels suitable for top-class SUVs.” That’s what “celestial” is.
Size: 24×10.0J 6H-139.7 Inset +58.0
Forging manufacturing method, 1-piece wheel
Accessories: Center cap, aluminum black air valve
Standards: JWL, VIA standard-compliant product
■This wheel is also compatible with the following LEXUS genuine center caps.
・Manufacturer part number: 42603-30551, 42603-53110
・Please note that genuine caps for LX cannot be used.