Description

Underwing – 68,800 yen (Carbon Fiber – 93,500 yen)
Applicable vehicle year: August 2015-for
・ FRP gel coat finish
・ For vehicles equipped with a Modellista front spoiler
A plus-on type spoiler is attached to the bottom of the modellista front spoiler. After mounting, it expands by +10 mm to the front and +30 mm to the bottom, increasing the profound feeling of the front and producing a powerful low form even at the normal vehicle height.
Note: Cannot be installed on normal bumpers

LED Day Ligh Panel – 80,500 yen
Applicable vehicle year: August 2015-for
・ FRP gel coat finish
・ For vehicles equipped with a modellista front spoiler
It is possible to attach 5 LED day lamps on each side to the modellista front spoiler, improving vehicle visibility and dressing up effect.
The LED uses a reliable domestic LED. Furthermore, since the connection coupler also uses a waterproof type, it is a safe spec that minimizes the risk of lighting defects.
* A part of the modellista spoiler needs to be cut for installation.

Front Spoiler – 149,500 yen (Carbon – 191,500 yen)
Applicable vehicle year: August 2015-for
・ FRP gel coat finish
・ For standard bumpers
A front spoiler that attaches to the bottom of the genuine bumper. By increasing the profound feeling of the front, it produces a powerful low form even at the normal vehicle height.
Five domestic LED lamps are standard equipment on one side of the spoiler on the left and right. By using it as a day lamp, it combines the dress-up of the vehicle and the improvement of visibility.

Left and right 4 out muffler & carbon panel kit – 239,000 yen
Muffler Only: 191,000 yen
Carbon Panel only: 63,900 yen
Applicable year: August 2015-for
・ Muffler: Stainless steel, new regulation-compliant product
・ Carbon panel: Wet carbon plain weave finish
・ For vehicles equipped with a modellista rear skirt
・ Muffler new regulation-compliant product * Please note that the 2-row seat (5-seater) specification is not subject to the new muffler regulation.
It is a set of left and right four-out mufflers and carbon panels that realizes the installation of left and right four-out mufflers even on vehicles equipped with Modellista rear skirts.
The tail end has a 120 x 85 mm square tail tip with a beautiful polyhedral shape placed in 2 x 2. Since the genuine main Tyco is a muffler that replaces only the rear piece that is used as it is, it maintains quietness close to that of a normal muffler.
Since it is necessary to process the rear skirt for installation, a carbon panel that closes the processed part is set as a set.
* It is necessary to remove the floor spare tire to install this kit.

Rear bumper spoiler – 30,500 yen (Carbon – 337,000 yen)
Applicable vehicle year: August 2015-for
-FRP gel coat finish.
-Includes LEXUS LS genuine tail finisher.
-Includes LEXUS LX570 genuine bumper step cover.
-Stainless steel bypass muffler included.
* A muffler for vehicle inspection that realizes realistic left and right exhaust from the LS finisher.
・ Muffler new regulation-compliant product
A rear bumper with a built-in pure raw tail finisher of LEXUS LS, which is an Elford-style classic that realizes a mufflerless look. The attached bypass muffler realizes realistic left and right exhaust without removing the spare tire on the floor.
LX570 medium-term genuine bumper step cover with stainless molding on the upper part of the bumper
By setting it, you can create an elegant and high-grade style.

Rear skirt extension – 97,200 yen
Applicable vehicle year: August 2015-for
・ FRP gel coat finish
・ Dedicated mat guard included
・ For vehicles equipped with a modellista rear skirt
Type expansion parts that can be attached to both sides of the modellista rear skirt. By installing it, the ground clearance will be lowered by about 40 mm. The rearview when the front underwing etc.

Sidestep extension –  101,000 yen
Applicable vehicle year: August 2015-for
・ FRP gel coat finish
・ Cover panel included
It is an expansion part of the type that is attached to the bottom of the genuine sidestep. The design does not sacrifice getting on and off but casually emphasizes the aerodynamic feeling.
In addition, a special cover panel is attached to prevent tire interference when installing large-diameter tires.
Note: Cannot be installed at the same time as the Mad Flap Mini.

Over Fender for Modellista Aero –  89,000 yen
Applicable vehicle year: August 2015-for
vehicles with modellista spoiler
・ Front 30mm: Rear 30mm wide
・ FRP gel coat finish
A 30mm wide (one side) over fender for vehicles with a modellista spoiler.
Suppressing the rising width of the fender to a low level creates a powerful exterior with a natural fit and a wide feel.

Elford Aero exclusive over fender –  113,000 yen
Applicable year: August 2015-for
vehicles with Elford front spoiler
・ Front 30mm: Rear 30mm wide
・ FRP gel coat finish
・ Elford emblem included
A 30mm wide (one side) over fender for Elford front spoiler vehicles.
The fender body has slits to make it look aggressive.
* It can be installed even on vehicles without side step extension.
(Caution) The duct at the rear of the front fender is closed at the time of delivery.
When making a real duct, cut along the marking line and attach a mesh net or the like. * Mesh net is not included.

Mad flap mini type –  11,500 yen
Applicable vehicle year: August 2015-for
・ For EVA black front
A mini-type mud flap with an improved mudguard effect on the side of the car body. Not only does it have a mudguard effect that prevents splashing, but it also prevents tire interference with the inner cover when 295 or 305-size tires are installed.
The fixed position can be slid slightly.
Note: Cannot be installed at the same time as the side step extension.

Power blade –  16,800 yen
・ For 3UR-FE (5.7L gasoline engine)
・ Easy to install. DIY installation is possible.
-You can experience acceleration in the low and medium speed range and improved torque feeling.
-Not only can it be installed as a single unit, but it can also be installed together with the sound chamber pipe and throttle spacer to complete the total tuning of the intake system.
The airflow sensor is an air cleaner or a sensor that converts the amount of air taken into an electric signal to measure the amount of intake air in the engine and sends information to the engine computer (ECU). The ECU uses this information to inject fuel. It determines the important parts of engine control such as ignition timing.
This power blade changes the way air flows to the airflow sensor with a specially shaped blade, which changes the characteristics to be more advantageous for acceleration and torque increase. Installation is very easy as you just remove the lid of the genuine air cleaner BOX and attach it to the airflow sensor body.
* (Caution)
Before purchasing this product, be sure
to check the manufacturer and genuine part number of the airflow sensor.
[Compatible genuine airflow sensor]
Made by HITACHI Part number; 22204-75030

Celestial Brush Up Alloy wheels  – 1,056,000 yen
Size: 24 x 10.0J 5H-150 Inset +41.5
The forging method, 1-piece wheel
Accessories: Center cap, aluminum black air valve
Standard: JWL, VIA standard compliant product * Land Cruiser 200ZX (VIA limited load 860 kg standard) compatible

Celestial Semi Gross Black / Diamon Cut Rim Alloy wheels  – 902,000 yen
Size: 24 x 10.0J 5H-150 Inset +41.5
The forging method, 1-piece wheel
Accessories: Center cap, aluminum black air valve
Standard: JWL, VIA standard compliant product * Land Cruiser 200ZX (VIA limited load 860 kg standard) compatible

Celestial Bright Metal gray/Diamond cut rim Alloy Wheels – 902,000 yen
Size: 24 x 10.0J 5H-150 Inset +41.5
The forging method, 1-piece wheel
Accessories: Center cap, aluminum black air valve
Standard: JWL, VIA standard compliant product * Land Cruiser 200ZX (VIA limited load 860 kg standard) compatible