ENDLESS Anti-noise Shim for Brake Endless Calipers
¥1,100
Please contact us for prices for other ENDLESS Brake System
Please select per-product shipping when placing the order. This can be shipped via economy airmail to most parts of Asia, the US, and Europe. However, the territories cannot be covered with this shipping, we may request an additional shipping charge after the buyer places the order. If you are in a rush and need to use expedited courier shipping please contact us.
Description
Applying a rubber coating to the low-vibration special plate, suppresses the vibration between the caliper and the brake pad when the brake is applied, preventing brake squeal.
Application: Suppression of noise caused by brakes
Applying a rubber coating to the low-vibration special plate, suppresses the vibration between the caliper and the brake pad when the brake is applied, preventing brake squeal.
【installation method】
Clean and degrease the back plate surface of the brake pad before attaching it to the back plate.
Make sure the anti-noise shims do not protrude beyond the backplate.
【Note】
・Since the anti-noise shim is bonded with tape, it may slip off from the brake pad at high temperatures. Please remove this anti-noise shim when using this product when the brakes become hot, such as when driving on a circuit.
・Cannot be used in environments where the brakes become hot, such as when driving on winding roads or circuits.
・When anti-noise shims are installed, the pedal touch becomes softer. We recommend that you do not use this product if you value pedal touch and brake feel.
– If either the brake pad or brake rotor is installed when either the brake pad or the brake rotor is worn out, squealing is likely to occur.
・Anti-noise shim is a product to reduce brake squeal. It does not mean that the noise will not occur at all by wearing it.
・The brake system is an important safety component. Please perform disassembly and maintenance at a certified factory or maintenance factory.
・This product is not a product that reduces friction noise generated between brake pads and rotors.
No
|
Product No | PAD No | F/R | Supported Caliper | Price |
---|---|---|---|---|---|
1
|
EPS001 | RCP052 RCP152 |
F/R | ENDLESS Caliper 6POT・RacingBIG4 |
1,100 yen / 1 Shim |
2
|
RCP080 | F | ENDLESS Caliper Racing6 |
||
3
|
RCP120 | F/R | ENDLESS Caliper 6POT Wagon・Legacy6GT |
||
4
|
RCP121 | F/R | ENDLESS Caliper RacingMONO6 (R35 Except Front)・RacingMONO6r (R35・BNR34・Z33 Except Rear ) |
||
5
|
RCP122 | R | ENDLESS Caliper RacingMONO6r (BNR34 Rear・Z33 Rear) |
||
6
|
RCP123 | F/R | ENDLESS Caliper RacingMONO6・RacingMONO6r (GT-R R35 Front・Rear) |
||
7
|
RCP146 RCP153 |
F | ENDLESS Caliper RacingMONO4 |
||
8
|
RCP066 RCP093 RCP151 |
F/R | ENDLESS Caliper 4POT・Chibi 6・Racing4・Legacy 6・Legacy 4・Forest 6・Forster 4・Chibi 6Wagon |
||
9
|
EPS013 | RCP158 RCP164 RCP167 |
F/R | ENDLESS Caliper S4F・S4R・Super micro6 Light |
|
10
|
RCP085 | F | ENDLESS Caliper Super micro6 ※*After shape change |
||
11
|
EPS014 | RCP162 RCP168 |
R | ENDLESS Caliper S2 | |
12
|
EPS015 | RCP002 | R | ENDLESS Caliper RacingMONO4GT CMC KIT | 4,450 yen / 4 Shims |
13
|
EPS016 | RCP163 RCP183 |
F | ENDLESS Caliper RacingMONO6GT/RacingMONO6GT CMC KIT | |
※The above anti-noise shims (EPS002 to 006) are the type that adheres to the back plate of the brake pad using only double-sided tape. |
*If you install the anti-noise shim, the pedal touch will be softer. We do not recommend using this product if you value brake feel. (Squealing is more likely to occur.)
* If either the brake pad or the brake rotor is worn, it will cause squealing.
*This product is not a product that reduces frictional noise generated between brake pads and rotors.
*Anti-noise shim is a product that reduces brake squeal. Installing the product does not mean that the noise will not occur at all.
*The brake system is an important safety component. Please perform disassembly and maintenance at a certified factory or maintenance factory.
*Be sure to remove the anti-noise shim when using it on a circuit or under high load.
*Anti-noise shims that are attached to tape will lose their adhesive strength over time. Periodically check that the brake pads have not shifted or fallen off.
You must be logged in to post a review.
You may also like…
-
Set of 4 Shims
-
Landcruiser 200/Lexus LX 570
-
ENDLESS TYPE-R BRAKE PADS SET for ENDLESS CALIPER 6POT / RACING BIG4 – RCP052
Original price was: ¥27,500.¥23,000Current price is: ¥23,000.Universal Type for Endless Calipper
Reviews
There are no reviews yet.