Enlarge High Mount Stop Lamp Flashing Kit for Crown Crossover
Original price was: ¥18,000.¥16,000Current price is: ¥16,000.
Part Number: FL-T09-CC
Please select per-product shipping when placing the order. This can be shipped via economy air shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered with this shipping, we may request an additional shipping charge after the buyer places the order.
Description
TOYOTA Crown Crossover Compatible High Mount Stop Lamp Flashing Kit
When the product is installed, the high-mount stop lamp will flash automatically in conjunction with the brake.
When you are stuck in a traffic jam or waiting at a traffic light, you can notify the following vehicles of your vehicle’s presence and help prevent unnecessary rear-end collisions.
Easy to install with the complete coupler on! Simply connect the product to the connector on the back of the high-mounted stop lamp in the rear hatch.
Of course, it is easy to remove!
[Compatible car models]
◎Toyota
crown crossover
[Model]
5AA-TZSH35 / 6AA-AZSH35
【Model year】
From September 2022 (Reiwa 4)
*Please note that it is not compatible with third-party high mounts.
*Also flashes during ACC (Adaptive Cruise Control)
Until a while ago, driving schools recommended pumping the brakes (pressing the brakes in small steps).
Older cars did not yet have ABS (anti-lock braking systems), so stepping on the pumping brakes not only prevented the tires from locking up, but also caused the brake lights to flash and alert the car behind you. It also had the effect of letting you know when to slow down.
Or you can show your love with five brake lights…
It is common practice to flash hazard lights to notify following vehicles at the end of a traffic jam, but if the vehicle is not at the end of a traffic jam, pumping the brakes (pressing the brakes in small steps) is used to flash the brake lights. By doing so, you can make the following vehicle think, “Huh?”
It is very important to use the brakes and hazard warnings to warn others to avoid being involved in an accident.
No matter how carefully you drive and how conscious you are of safety, being rear-ended by a careless third party can still happen.
It’s not just cars that get dented by being dug in.
To protect your vehicle, which is your property, the safety of your passengers, and yourself, ensuring the safety of the rear of your vehicle and appealing to following vehicles is an important factor.
Even if the car behind you thinks it’s annoying to have your brake lights turned on so many times, it’s proof that you’ve succeeded in alerting them in the sense of “getting them to pay attention to your car.”
That’s where the “High Mount Stop Lamp Flashing Kit” comes in!
By installing this product, you can expect the same effect as pumping brakes, with the high-mounted stop lamp flashing just by stepping on the brake without having to be conscious of it.
In addition, since the light only flashes when the brake pedal is pressed, the light will immediately turn on normally when the light is stopped, such as when waiting at a traffic light, so it will not cause any unnecessary irritation to vehicles behind you.
In addition, the product is a complete coupler-on, and the installation location is easily accessible, so even people who are not familiar with cars can install it in just 5 minutes.
Of course, it is also easy to remove.
Just insert it between the genuine connectors, so it won’t damage the original car wiring.
■Functional explanation■
– When you step on the brake (keep stepping on it), the high-mount stop lamp flashes three times twice, then returns to its normal lighting state.
– If you take your foot off the brake while it is blinking 3 x 2 times, the blinking will stop midway, and when you press the brake again, it will start blinking 3 x 2 times again.
■Lighting pattern■
・Flashes 3 times x repeats 2 times, then turns on normally (initial)
– Normally lights up after blinking 3 times
・Normal lighting (blinking OFF, same as genuine)
■Switching method■
The lighting pattern will change when you start the engine and step on the brake 7 times in a row at a pace of about 1 time/1 second.
Every time you press the brake 7 times in a row, the lighting pattern will change repeatedly in the following order.
Blinks 3 times x repeats 2 times then turns on normally
↓
After blinking 3 times, it lights up normally.
↓
Normally lit
■About vehicle inspection■
Please return the lights to normal when entering the vehicle during vehicle inspection. Regarding vehicle inspections, depending on the inspector’s judgment, there is a possibility that your vehicle will not pass the vehicle inspection. We do not guarantee 100% vehicle inspection compliance. Please understand this before purchasing.
*The flashing mode of the high-mounted stop lamp in this product is intended for driving on private property such as events and racing tracks. Please note that it may be a violation if used on public roads.
■Product contents■
・Wiring with connector x 1
*Installation and handling instructions are not included. Please see the images and videos on the page for installation and switching methods, and purchase only if you can install it yourself.
You must be logged in to post a review.
You may also like…
-
Enlarge Engine Auto ON/OFF [Idling Stop] Canceller Kit for GR Yaris
Original price was: ¥12,000.¥11,000Current price is: ¥11,000.Compatible with GR Yaris -
Enlarge Vehicle Speed or P Shift Auto Door Lock Kit for Yaris
Original price was: ¥17,000.¥16,000Current price is: ¥16,000.GR Yaris/Yaris/Yaris Cross -
Enlarge Auto Brake Hold Kit for Yaris Cross
Original price was: ¥15,000.¥13,000Current price is: ¥13,000.Compatible with Yaris/Yaris Cross
Reviews
There are no reviews yet.