Description

High mount stop lamp flashing kit for Toyota GR Yaris
When installing the product, the high-mount stop lamp will automatically flash in conjunction with the brake.
In traffic jams or while waiting at a traffic light, the system is useful in preventing unnecessary rear-end collisions by highlighting the presence of your vehicle to vehicles behind you.
Easy to install with the complete coupler on! Just connect the product to the connector on the back of the high-mount stop lamp so that it is sandwiched.
Easy to remove, of course!!

[Compatible models]
◎Toyota
GR Yaris
*Please note that it is not compatible with a high amount of external products.

■ commodity content ■
・Wiring with connector x 1
*Installation and handling instructions are not included. Please refer to the image

Until a decade ago, driving schools recommended pumping brakes (applying the brakes in small increments).
Older cars do not have ABS (anti-lock braking system) yet, and stepping on the pumping brakes not only prevents the tires from locking but also flashes the brake lights to prevent the following vehicles from locking up. It also had the effect of letting you know to slow down.
Or you can say love with 5 brake lights…

At the end of a traffic jam, it is common to flash the hazard lamps to notify the following vehicles, but if the traffic is not yet, pumping brakes (applying the brakes in small increments) are used to flash the brake lamps. By doing so, you can make the following car think, “What?”

Calling attention by using brakes and hazards is very important to prevent getting involved in an accident.

No matter how carefully you drive and pay attention to safety, being rear-ended by a careless third party can happen no matter how careful you are.

Cars aren’t the only ones that get dented by fags.
It can be said that ensuring the safety of the rear of the car and appealing to the following vehicles is one of the important factors in order to protect the safety of your car, which is your property, the safety of your fellow passengers, and yourself.

Even if the following car thinks, “It’s troublesome to have the brake lights turned on many times,” it’s proof that the warning is successful in the sense that it makes you pay attention to your car.

That’s where the “High Mount Stop Lamp Flashing Kit” comes in!
By installing the product, you can expect the same effect as a pumping brake by simply stepping on the brake and the high-mounted stop lamp will flash without being conscious of it.
In addition, since the light flashes only when the brake is applied, the light will return to normal immediately while the vehicle is stopped, such as waiting at a traffic light, so that it will not irritate the following vehicle unnecessarily.

In addition, the product is fully coupler-on, making it easy to access the installation location, so even people who are not familiar with cars can install it in 5 minutes.
Of course, it is easy to remove.
Just insert it between the genuine connectors, so it will not damage the wiring of the original car.
moreover! Now the product can also switch the blinking pattern! In addition, it is possible to switch to the genuine state (blinking OFF), so there is no need to remove the product during vehicle inspection!

■ Function description ■
・If you step on the brake (keep stepping on it), the high-mounted stop lamp will flash repeatedly, and then return to normal lighting.
・It is possible to switch the blinking pattern and switch to the genuine state (not blinking).

■Lighting pattern■
・Normal lighting after repeating blinking 3 times x 2 times (initial)
・Normal lighting after blinking 3 times
・Normal lighting (blinking OFF Same as genuine)

■ How to switch ■
“Start the engine and step on the brake 7 times in a row at a pace of about 1 time / 1.0 seconds” and the lighting pattern will switch.
Every time the brake is stepped on 7 times in a row, the lighting pattern is changed repeatedly in the following order.
Flashes 3 times x 2 times, then lights normally
↓
Flashes 3 times, then lights normally
↓
Normal lighting

■ vehicle inspection ■
At the time of vehicle inspection, please enter with the lights returned to normal when entering.
Regarding vehicle inspection, depending on the judgment of the inspector, there is a possibility that the vehicle will not pass the vehicle inspection. We do not guarantee 100% compliance with a vehicle inspection. Please be aware of this before purchasing.
*The blinking mode of the high-mounted stop lamp in this product is intended for driving on private land at events and racing tracks. Please note that it may be a violation when used on public roads.

■ commodity content ■
・Wiring with connector x 1
*Installation and handling instructions are not included. *Installation and handling instructions are not included. The image on the page for how to install and how switch