KYO-EI Wide Tread Spacer
Original price was: ¥28,000.¥24,000Current price is: ¥24,000.
Description
■Upgraded to a wider tread by bolt-on mounting on genuine and commercially available aluminum wheels.
■ High-quality products manufactured under precise design and thorough quality control (MADE IN JAPAN).
■The hub bolts are made of chromium molybdenum steel and are hardened to ensure high strength and durability.
■It matches the body and contributes to a cool appearance. Improved turning performance due to wider tread.
■Special nut (for 11-15mm) prevents the spacer from loosening. High reliability that can withstand hard sports driving.
■Number of holes HOLE: 5H・4H ■P.C.D.: 100・114.3
■Thickness: 11/15/20/25/30mm
■Outer dia.: 145mm ■SIZE: M12×P1.5/M12×P1.25
■Material: Aluminum/Bolt (SCM435 chromoly steel)
●1 set of 2 pieces (2pcs SET)
●Accessories/dedicated nut/dedicated adapter
*Special hub ring is sold separately.
Wide Tread Spacer M12×P1.5 |
Thread size |
HOLE | PCD | Thickness mm | Product number No. | JAN code |
M12 x P1.5 | 5 | 114.3 | 11 | 5111W1 | 4965581 806389 |
15 | 5115W1 | 4965581 803104 | |||
20 | 5120W1 | 4965581 800806 | |||
25 | 5125W1 | 4965581 800608 | |||
30 | 5130W1 | 4965581 804200 | |||
100 | 11 | 5011W1 | 4965581 806372 | ||
15 | 5015W1 | 4965581 803005 | |||
20 | 5020W1 | 4965581 800707 | |||
25 | 5025W1 | 4965581 800509 | |||
30 | 5030W1 | 4965581 804002 | |||
4 | 114.3 | 11 | 4111W1 | 4965581 806365 | |
15 | 4115W1 | 4965581 802909 | |||
20 | 4120W1 | 4965581 800400 | |||
25 | 4125W1 | 4965581 801803 | |||
30 | 4130W1 | 4965581 803807 | |||
100 | 11 | 4011W1 | 4965581 806358 | ||
15 | 4015W1 | 4965581 802800 | |||
20 | 4020W1 | 4965581 801902 | |||
25 | 4025W1 | 4965581 801704 | |||
30 | 4030W1 | 4965581 803609 |
Wide Tread Spacer M12×P1.25 |
Thread size |
HOLE | PCD | Thickness mm | Product number No. | JAN code |
M12 x P1.25 | 5 | 114.3 | 11 | 5111W3 | 4965581 806426 |
15 | 5115W3 | 4965581 803500 | |||
20 | 5120W3 | 4965581 801605 | |||
25 | 5125W3 | 4965581 801407 | |||
30 | 5130W3 | 4965581 804309 | |||
100 | 11 | 5011W3 | 4965581 806419 | ||
15 | 5015W3 | 4965581 803401 | |||
20 | 5020W3 | 4965581 801506 | |||
25 | 5025W3 | 4965581 801308 | |||
30 | 5030W3 | 4965581 804101 | |||
4 | 114.3 | 11 | 4111W3 | 4965581 806433 | |
15 | 4115W3 | 4965581 803302 | |||
20 | 4120W3 | 4965581 801209 | |||
25 | 4125W3 | 4965581 801001 | |||
30 | 4130W3 | 4965581 803906 | |||
100 | 11 | 4011W3 | 4965581 806396 | ||
15 | 4015W3 | 4965581 803203 | |||
20 | 4020W3 | 4965581 801100 | |||
25 | 4025W3 | 4965581 800905 | |||
30 | 4030W3 | 4965581 803708 |
Wide Tread Spacer PCD Change M12×P1.5 |
Thread size |
HOLE | PCD | PCD Change (vehicle side → wheel side) |
Thickness mm | Product number No. | JAN code |
M12 x P1.5 | 5 | 114.3 | 114.3→100 | 15 | 5215W1 | 4965581 804606 |
100 | 100→114.3 | 15 | 5415W1 | 4965581 805009 | ||
4 | 114.3 | 114.3→100 | 15 | 4215W1 | 4965581 804408 | |
100 | 100→114.3 | 15 | 4415W1 | 4965581 804804 |
Wide Tread Spacer PCD Change M12×P1.25 |
Thread size |
HOLE | PCD | PCD Change (vehicle side → wheel side) |
Thickness mm | Product number No. | JAN code |
M12 x P1.25 | 5 | 114.3 | 114.3→100 | 15 | 5215W3 | 4965581 804705 |
100 | 100→114.3 | 15 | 5415W3 | 4965581 805108 | ||
4 | 114.3 | 114.3→100 | 15 | 4215W3 | 4965581 804507 | |
100 | 100→114.3 | 15 | 4415W3 | 4965581 804903 |
Refill parts (1pc) PARTS (1pc) |
■Nut for 11mm |
Product number No. | Size | JAN code | Price (1pc) | |
Z10150 | M12×P1.5 | 4965581 113913 | 800 yen | |
Z10125 | M12×P1.25 | 4965581 113937 |
■Nut for 15mm |
Product number No. | Size | JAN code | Price (1pc) | |
Z15150 | M12×P1.5 | 4965581 113920 | 800 yen | |
Z15125 | M12×P1.25 | 4965581 113944 |
■Nut for 20-30mm |
Product number No. | Size | JAN code | Price (1pc) | |
F1.5 | M12×P1.5 | 4965581 113609 | 250 yen | |
F1.25 | M12×P1.25 | 4965581 113906 |
|
|
Warning, car models that cannot be installed
●Vehicle models with 1 number, 4 number, or 8 number
●Vehicles with drum brakes whose mounting surface is not flat
●For special vehicles other than those listed above, please contact us.
Precautions when installing wide tread spacers
*Please do not install it on cars other than domestic ones.
●If the tire or wheel receives a strong impact, excessive force will be applied to the wide tread spacer, which may cause damage if used as is, which may lead to an accident, so please never use that product. .
●Depending on the thickness of the spacer or the offset of the wheel, it may be impossible to install it on the vehicle (protruding from the fender or touching the tire house). When purchasing, please check the condition of the current vehicle before purchasing.
●Please do not install steel wheels as the mounting surface is not flat.
●Before installation, be sure to remove rust, dirt, etc. from the mounting surface on the back of the wheel and the hub side of the vehicle using a wire brush, etc.
●Do not apply oil or grease to the vehicle hub bolts, spacer hub bolts, or mounting nuts. Doing so may damage the bolts if they are tightened more than necessary.
●Do not install the product if there are any foreign objects or protrusions on the hub side of the vehicle or the back side of the wheel.
●When installing the wide tread spacer to the vehicle hub bolt, if the bolt protrudes beyond the spacer, do not install the wide tread spacer.
●If there is a “relief” on the back side of the installed wheel, it is possible to install a wide tread spacer. However, if the “relief” depth is not deep enough to allow the genuine stud bolts to escape, please do not install the wide tread spacer.
●Cannot be installed on drum brake vehicles where the mounting surface is not flat or if there are any protrusions. Also, please never install it on vehicles with steel wheels.
●Some vehicles have large hub diameters and may not be able to be fitted with wide tread spacers. When purchasing, please check the vehicle hub diameter and wide tread spacer inner diameter before purchasing.
●After installing wide tread spacers, we recommend alignment adjustment to prevent uneven tire wear.
●When installing on a vehicle with a sliding door, be careful not to let the tires protrude. The sliding door may interfere with the tires and may not open.
●Please note that when installing a 10mm hub centric ring, it may not be possible to install it on vehicles with a vehicle hub height of 12mm or more depending on the shape of the wheel mounting surface.
●We do not guarantee any malfunction or damage caused by incorrect installation or handling.
You must be logged in to post a review.
You may also like…
-
DIGICAM TITANIUM RACING NUT 20x35mm17HEX
Original price was: ¥57,200.¥44,720Current price is: ¥44,720.Support for most Toyota Cars -
DIGICAM Long Nut for Toyota wide tread spacer 20/25mm
Original price was: ¥1,664.¥1,436Current price is: ¥1,436.Support for most Toyota Cars -
DIGICAM Long Nut for Toyota wide tread spacer 10/15mm
Original price was: ¥1,560.¥1,332Current price is: ¥1,332.Support for most Toyota Cars
Reviews
There are no reviews yet.