Description

Largus full length adjustable harmonic drive kit SpecS

The camber bolt is an eccentric bolt that can adjust the camber angle by replacing it with a genuine bolt of the knuckle of the strut-type suspension.
Normally, genuine suspensions, genuine shape suspensions, and non-adjustable upper mount harmonic drives do not have a camber angle adjustment function. In addition, there are some models that become negative camber with lowdown and cannot be on the positive side even if the upper mount is adjusted.
In such a case, it is this camber bolt that can adjust the camber or assist the adjustment only by replacing the bolt.
LARGUS camber bolts are overwhelmingly less likely to shift and have excellent durability compared to bolts with a structure in which genuine parts are made thinner due to the structure of the adjustment cam, shim, and stopper, so you can install them with confidence.

In the following cases, please consider using a camber bolt.
[1] When the camber is lowered with a genuine suspension or down suspension that cannot be adjusted, the camber angle is too large and the tires are heavily worn unevenly.
[2] I want to improve turning performance and cornering performance by adding a camber angle.
[3] When the tread was widened, the tires and wheels protruded from the fender and did not meet the safety standards.
[4] The camber angle is not enough with the adjustment width of the adjustable upper mount.

In some cases, the above cases can be solved by attaching camber bolts.

(* It does not guarantee that uneven wear is prevented or conformity to safety standards is achieved only by installing camber bolts. Be sure to adjust the alignment after adjusting the camber angle.)

The stabilizer link (commonly known as the stabilizer link) refers to the rod that connects the stabilizer and suspension and is an important part related to the movement of the stabilizer mentioned above.

When the angle between the stabilizer and the stabilizer link, which is almost right-angled at normal vehicle height, is lowered due to harmonic drive or down suspension, the angle is always set, and the original performance cannot be exhibited. It causes deterioration of comfort and deterioration of driving performance. Therefore, by correcting the angle with the adjustable stabilizer, the input from the road surface can be accurately transmitted to the stabilizer, and the original effect of the stabilizer can be exhibited.

* When installing, mark with markings so that you can see the direction of the bolt claws.

Precautions
・ It is strongly recommended to adjust the alignment after installation.
・ The camber angle that can be adjusted using this product varies depending on the model and usage conditions, so we cannot answer.
・ This product is exclusively for strut suspension. It cannot be used with suspensions of other shapes.
・ The product image is a sample image. Colors may vary depending on the bolt size and production rod.

Bolt size: 12mm
A: 14mm B: 9mm C: 12mm D: 64mm E: 15mm

Bolt size: 14mm
A: 17mm B: 11mm C: 14mm D: 70mm E: 18mm

Bolt size: 15mm
A: 15mm B: 12mm C: 15mm D: 70mm E: 18mm

Bolt size: 17mm
A: 18mm B: 14mm C: 17mm D: 81mm E: 21mm

Each size: 2 pieces 1 set