Description

Front under Spoiler – 110,200 yen
The twin duct motif expresses a hot run. Piano black / matte black 2 colors painted.
BPA1 V4 900 (former part number: MBP2110-08)
Piano black/matte black 2 colors painted ABS resin drilling required

Front Grill – 105,800 yen
Trade in the Mazda emblem. The fin type with piano black on the surface and matte black paint on the recesses.
Part Number: MBP2510
Piano black/matte black 2 colors painted ABS resin

Muffler garnish – 50,800 yen
Garnish for sports muffler. The mass-produced bumper is cut and mounted to form an aggressive form.
Part Number: MBP2410
For vehicles with sports muffler (MBP8Y50 / 8Y60) Cannot be installed separately AES black satin finish (no painting required) Rear bumper excision required
Cannot be installed at the same time as the rear under panel (MBP2400)

Rear roof spoiler
Floating type full of sports mind. Piano black Painted / unpainted products are available.
Part Number : BPA1 V4 920 (former part number: MBP2600-08) – 105,800 yen
Piano Black Painted AutoExe Ornament Included FRP Drilling Required
Part Number: MBP2600 – 83,800 yen
FRP Drilling Required Painted AutoExe Ornament Included FRP Drilling Required

Sport side visors – 35,800 yen
Equipped with a ventilation mechanism that actively discharges the air inside the vehicle by using the negative pressure generated during driving.
Part Number: BPA1 V3 700 (former part number: MBP0400A)
Smoke acrylic resin 4-piece set with ventilation mechanism

Fuel Lid Cover – 21,800 yen
A mechanical one-point item that gives off a metallic feel. Double-sided tape is attached to the mass-produced fuel lid cover.
Part Number:  MBP1610
ABS chrome plated AutoExe logo double-sided tape adhesive

Club Sports Suspension Kit- 292,800 yen
Hard specifications that cut down the comfort to the limit that we can tolerate and convert the margin to exercise performance. The standard vehicle height is -30mm. In order to maintain accurate operability even in winding and hard circuit driving, a monotube type inverted damper with excellent heat conversion ability and rigidity under high load and a series-wound spring with a spring constant that rises linearly are adopted. Creates a solid driving sensation with a high sense of change regardless of the speed range.
<Main specifications> ・ Vehicle height adjustment type

Part Number: MBP7970
Monotube full-length adjustment type damping force 24 steps adjustment type Recommended vehicle height-30mm Spring constant: Fr: 95.0 Rr: 68.61N / mm

Sports muffler Fastback diesel vehicle – 292,800 yen / Fastback gasoline 2WD vehicle (excluding SKY-X) – 292,800 yen
Aggressive 4-piece slash tail specification that can be installed at the same time as the muffler garnish. In terms of functionality, improving exhaust efficiency has been given top priority, and the multi-stage expansion type of mass-produced vehicles has been changed to a straight structure to reduce back pressure loss. The pipe layout and silencer capacity have been carefully examined exclusively for diesel and gasoline vehicles to obtain an agile response. By muting without using glass wool, it creates a sports sound with good clearness without stagnation up to the high register.
<Main specifications> ・ Stainless steel ・ Main pipe diameter φ60.5 ・ Tail diameter 80mm (× 4)
Part Numbers: MBP8Y50 / MBP8Y60
Stainless steel main pipe diameter φ60.5 Tail diameter 80mm (× 4)

Muffler garnish – 50,800 yen
Part Number: MBP2410
AES black satin finish (no painting required)
Cannot be installed at the same time as the rear under panel (MBP2400 )

Club sports brake pads [Front – MBP5B10] – 35,300 yen / [Rear – MBP5B10] – 33,800 yen
Sometimes to the circuit … A sports pad that aims for “deceleration at will” that synchronizes with the driver’s sensibility in high load areas such as continuous corners and full braking from straight. The material is a blend of carbon and metal material with excellent fade resistance. It balances the conflicting frictional force and the suppression of rotor aggression at a high level.
<Main specifications> ・ Graphite metal friction material ・ Rotor proper temperature: 50-800 ℃
ABS chrome plated AutoExe logo double-sided tape adhesive

Brake pedal brace – 29,800 yen
The bracket of the pedal mounting part, which causes slight distortion during brake operation, is three-dimensionally reinforced with steel braces to ensure rigidity. It improves the delay in reaction from when the pedal is pressed until the brake is applied, and contributes to a direct effect. >> More details
<Main specifications> -Steel 2-piece structure
All cars except SKY-X
Part Number: MBP4950
Steel 2-piece configuration

Aero sports wiper blade- 21,800 yen
Uses a flat-type blade for the main body. By adding a deflector with fins, the arm joint is made into an aero form. The wind pressure generated during driving is positively received and the wiper lift is suppressed. The blade rubber is evenly adhered to the glass surface to improve visibility when driving at high speeds in the rain.
<Main specifications> ・ Flat type ・ Equipped with wind deflector ・ Compatible with water-repellent glass ・ Set of 2 left and right
Part Number: MBP0260
Flat type wind deflector equipped Water repellent glass compatible 2 left and the right set