ROJAM Kit Kit for Toyota Landcruiser 300 ZX Modellista
Original price was: ¥332,000.¥325,000Current price is: ¥325,000.
ROJAM Body Kit for Toyota Landcruiser 300ZX Modellista includes [Unpainted] Front Corner Spoiler + Rear Corner Spoiler + Rear Center Spoiler + Rear Gate Spoiler + Muffler Adaptor
You can also purchase individual parts. See the prices below.
This can be shipped via air to most parts of Asia, the US, and Europe. However, since this shipping does not cover all territories, we may request an additional shipping charge after the buyer places the order. We can also ship via DHL, UPS, or FedEx.
Description
Front Corner Spoiler for LC 300 Modellista [Un-Painted] – 80,000 yen
Compatibility: FJA300W VJA300W 2021/8~
*Designed exclusively for models equipped with Modellista Aero.
*Cannot be installed on vehicles not equipped with Modellista Aero.
*GR SPORT cannot be installed.
*Unpainted product
*FRP material
Accessories: Instructions, mounting screws, double-sided tape
BUY THIS PART ONLY
Rear Corner Spoiler for LC 300 Modellista [Un-Painted] – 80,000 yen
Compatibility: FJA300W VJA300W 2021/8~
*Designed exclusively for models equipped with Modellista Aero.
*Cannot be installed on vehicles not equipped with Modellista Aero.
*GR SPORT cannot be installed.
*Unpainted product
*FRP material
Accessories: Instructions, mounting screws, double-sided tape
BUY THIS PART ONLY
Rear Center Spoiler [Un-Painted] – 80,000 yen
Compatibility: FJA300W VJA300W 2021/8~
*Designed exclusively for models equipped with Modellista Aero.
*Cannot be installed on vehicles not equipped with Modellista Aero.
*GR SPORT cannot be installed.
*Unpainted product
*FRP material
*The muffler part has two marked lines on the left and right, so if you cut along the marked lines, you can install Modellista’s muffler cutter or a rear muffler made by a third party.
*When installing a genuine muffler, process the exhaust to escape from the aero parts.
Accessories: Instructions and mounting screws
*For installation, it is necessary to drive a tapping screw into Modellista Aero.
BUY THIS PART ONLY
Rear Gate Spoiler [Un-Painted] – 80,000 yen
Compatible with: FJA300W VJA300W 2021/8~
*Can be installed on all grades
*Unpainted
*FRP material
Accessories: Instructions, double-sided tape
[Delivery time estimate] 3-4 weeks
*As this is a made-to-order product, the normal delivery time is about 3-4 weeks.
*Delivery times may vary slightly depending on the factory’s production status and the product’s arrival status. Please be aware of this in advance.
BUY THIS PART ONLY
Muffler Cutter – 12,000 yen
Compatibility: FJA300W VJA300W 2021/8~
*Purchase of ROJAM rear center spoiler is required.
*It is necessary to cut the genuine muffler for installation.
*Please install it using the included bolts, nuts, and welding.
Accessories: Instructions, bolts, etc.
*This is a standalone muffler cutter product.
*A rear center spoiler (sold separately) is required to be installed.
OPTIONAL PARTS
Bonnet Duct – 71,000 yen
Compatible with: FJA300W VJA300W 2021/8~
*Can be installed on GX, AX, VX, and ZX grades
*Can be installed on GR SPORT
*Unpainted
*FRP material / FRP x CFRP (carbon) material
*CFRP material (carbon) will be released at a later date.
*2P for driver’s side and passenger’s side.
Accessories: Instruction manual, double-sided tape, primer
[Estimated delivery time] 4 to 6 weeks
*As this is a made-to-order product, the normal delivery time is about 4 to 6 weeks.
*Delivery time may vary slightly depending on the factory’s production situation and the product’s arrival status. Please note in advance.
BUY THIS PART ONLY
Front Fender Duct – 65,000 yen
Compatible with: FJA300W VJA300W 2021/8~
*Can be installed on GX, AX, VX, and ZX grades
*Can be installed on GR SPORT
*Unpainted
*FRP material / FRP x CFRP (carbon) material
*CFRP material (carbon) will be released at a later date.
*2P for driver’s side and passenger’s side.
Accessories: Instruction manual, double-sided tape, primer
[Estimated delivery time] 4 to 6 weeks
*As this is a made-to-order product, the normal delivery time is about 4 to 6 weeks.
*Delivery time may vary slightly depending on the factory’s production situation and the product’s arrival status. Please note in advance.
BUY THIS PART ONLY
Rear Fender Duct – 65,000 yen
Compatible with: FJA300W VJA300W 2021/8~
*Can be installed on GX, AX, VX, and ZX grades
*Can be installed on GR SPORT
*Unpainted
*FRP material / FRP x CFRP (carbon) material
*CFRP material (carbon) will be released at a later date.
*2P for driver’s side and passenger’s side.
Accessories: Instruction manual, double-sided tape, primer
[Estimated delivery time] 4 to 6 weeks
*As this is a made-to-order product, the normal delivery time is about 4 to 6 weeks.
*Delivery time may vary slightly depending on the factory’s production situation and the product’s arrival status. Please note in advance.
BUY THIS PART ONLY
Aero Mirror Cover – 71,000 yen
Compatible with: FJA300W VJA300W 2021/8~
*Can be installed on GX, AX, VX, and ZX grades
*Can be installed on GR SPORT
*Unpainted
*FRP material / FRP x CFRP (carbon) material
*CFRP material (carbon) will be released at a later date.
*2P for driver’s side and passenger’s side.
Accessories: Instruction manual, double-sided tape, primer
[Estimated delivery time] 4 to 6 weeks
*As this is a made-to-order product, the normal delivery time is about 4 to 6 weeks.
*Delivery time may vary slightly depending on the factory’s production situation and the product’s arrival status. Please note in advance.
BUY THIS PART ONLY
You must be logged in to post a review.
You may also like…
-
TRD Aero Body Kit for Toyota Landcruiser Prado
Original price was: ¥221,104.¥210,704Current price is: ¥210,704.For Toyota Landcruiser Prado 2017.9~ -
M’Z SPEED Body Kit for Toyota LAND CRUISER PRADO
Original price was: ¥228,800.¥228,280Current price is: ¥228,280.(GRJ15#/TRJ15#/GDJ15#) 2017/9 - -
M’z SPEED LUV Line Body Kit for Toyota Landcruiser Prado
Original price was: ¥412,568.¥402,168Current price is: ¥402,168.LAND CRUISER PRADO (GRJ15#/TRJ15#/GDJ15#) 2013/9 - 2017/8
Reviews
There are no reviews yet.