TSUDA Racing DAMSEL Hyper Damper Set for for Jimny JB64
Product code: JIM121
Please select per-product shipping when placing the order. This can be shipped via economy air shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered with this shipping, we may request an additional shipping charge after the buyer places the order.
A street damper for normal vehicle height was finally completed in collaboration with Tsuda Racing and Bilstein. It is the strongest damper set that completely eliminates pitching and rolls peculiar to JB64 and also improves ride comfort with characteristics that maximize matching with normal springs.
In addition, in combination with coils other than normal springs and DAMSEL street coils, the performance may not be fully demonstrated.
Please be careful if you have already installed a coil other than the above.
■ Front MIN 276mm MAX 415mm
Rear MIN 312.5mm MAX 460mm
**Precautions for installation**
The genuine front has a color, but this product is a type that does not have a color.
Please refer to “Ⓑ without color” in the enclosed instruction manual (yellow A4 size paper).
Do not use the genuine color, please install only with the attached parts.
There is no right or left for both front and rear.
The Jimny has a rigid axle suspension, so you can only adjust the toe.
In addition, since this product does not require toe adjustment due to the normal vehicle height, alignment adjustment is not required when replacing.
Regarding compatibility with tires, basically, the performance of the shock does not change depending on the tire.
Similarly, tire characteristics such as road surface resistance and rainy day characteristics are reflected in the ride comfort, so it is a good idea to consult with the store where you purchased the tire.
In addition, please inquire with specialty stores about suitable sizes, etc.
As for the shock, the size is the same as the genuine one, so the tires that can be installed as genuine can be installed in the same way.