Description

●It has the effect of taking in a lot of fresh air from the outside air inlet. In addition, it is possible to prevent the entry of fallen leaves, etc. Fixed with double-sided tape or tapping screws.
*Carbon FRP products are finished with carbon only on the outside.

Specification
Material Wet carbon (1 ply carbon + 1 ply glass mat)
weight of about 200g
Mounting It can be installed with double-sided tape, but
we recommend fixing it with a tapping screw.
Compatible car models Jimny SJ30/SJ40/JA71/JA11/JA51/JB31/samurai/JA12/JA22/JB32

About FRP/carbon parts
●FRP/carbon parts are handmade. Therefore, please note that there may be slight deviations in hole positions, burrs, gloss, etc.
-The surface of FRP/carbon parts is gel-coated. Requires priming and painting. Painting can prevent deterioration due to UV rays.
●The specifications of the reinforcement on the back of the FRP/carbon parts are subject to change without notice. Therefore, there may be slight differences between the product you purchased and the photo shown, but please understand that there is no particular problem in using it.

Note
●FRP/carbon parts are completely made-to-order products. Therefore, we cannot accept cancellations after an order has been placed.
●After receiving the FRP/carbon parts, please be sure to check that there is no damage.
●We cannot accept returns or exchanges due to the customer’s convenience, except for product defects or damage during transportation.
●FRP/carbon parts are produced after receiving an order, so it takes time to ship. Please note that if you order items other than FRP/carbon parts, they will be shipped together with the FRP/carbon parts.
●If the FRP bonnet is installed on a vehicle that allows the front window to be folded down, the FRP bonnet may be damaged if the front window is folded down.