Sale!
ATS Carbon Triple Clutch for Toyota GR Yaris
Original price was: ¥428,000.¥400,000Current price is: ¥400,000.
Please select per-product shipping when placing the order. This can be shipped via economy air shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered
with this shipping, we may request an additional shipping charge after the buyer place the order.
Description
・ It seems that there are carbon clutches made by other companies that slip when cold, but ATS’s carbon clutch will not slip at all on highways and circuits as long as it is warmed up, even if it is a single clutch.
・Transmission force, operability, transmission protection performance, the improvement effect of shift feel, durability, and sales record, the ATS carbon clutch has uniqueness and high product value that other companies’ clutches do not have. In addition, with proper usage and maintenance, the twin-clutch has a long lifespan of more than 300,000 km, so it is excellent in cost performance.
・ There is only one thing to be aware of in order to maintain poor cutting, slippage, and long life. That is, don’t use a long half-clutch. Half-clutch operation for 1-2 seconds is not a problem if the engine speed is near idling, but at 2000 rpm or more, the half-clutch operation should be within 0.5 seconds. ・ It is not possible to use a carbon clutch in a drag race that uses a long half-clutch at the start, or in situations where long half-clutches and half-clutches are repeated in a short period of time (this operation is expressed as rubbing the clutch in drifting). Avoid. Immediately causes problems such as slippage and poor cutting.
・ If you operate the clutch half-clutch for a long time or repeatedly half-clutch in a short time, the carbon disk will be immediately heated to over 1000℃, and the steel parts (fly, center plate, pressure plate) that are in contact with the carbon will be instantly distorted. I will let you.
When a distorted steel part and a non-distorted carbon disc come into contact with each other, it becomes a circular line contact, which significantly reduces the transmission force and causes slippage and poor cutting. Even in such a case, if you continue to use it within the non-slip range, the carbon disc may wear unevenly, resulting in surface contact and restoring normal transmission power. However, in that case, uneven wear may shorten the life of the carbon disc and reduce the pressure on the cover at an early stage.
・Transmission force, operability, transmission protection performance, the improvement effect of shift feel, durability, and sales record, the ATS carbon clutch has uniqueness and high product value that other companies’ clutches do not have. In addition, with proper usage and maintenance, the twin-clutch has a long lifespan of more than 300,000 km, so it is excellent in cost performance.
・ There is only one thing to be aware of in order to maintain poor cutting, slippage, and long life. That is, don’t use a long half-clutch. Half-clutch operation for 1-2 seconds is not a problem if the engine speed is near idling, but at 2000 rpm or more, the half-clutch operation should be within 0.5 seconds. ・ It is not possible to use a carbon clutch in a drag race that uses a long half-clutch at the start, or in situations where long half-clutches and half-clutches are repeated in a short period of time (this operation is expressed as rubbing the clutch in drifting). Avoid. Immediately causes problems such as slippage and poor cutting.
・ If you operate the clutch half-clutch for a long time or repeatedly half-clutch in a short time, the carbon disk will be immediately heated to over 1000℃, and the steel parts (fly, center plate, pressure plate) that are in contact with the carbon will be instantly distorted. I will let you.
When a distorted steel part and a non-distorted carbon disc come into contact with each other, it becomes a circular line contact, which significantly reduces the transmission force and causes slippage and poor cutting. Even in such a case, if you continue to use it within the non-slip range, the carbon disc may wear unevenly, resulting in surface contact and restoring normal transmission power. However, in that case, uneven wear may shorten the life of the carbon disc and reduce the pressure on the cover at an early stage.
Number of disks: Tripple
Cover crimping force (Kg): 1100kg
DA PULL
PERFORMANCE
You must be logged in to post a review.
You may also like…
-
OGURA RACING ORC 559DB TWIN PLATE CLUTCH for Toyota GR Yaris
Original price was: ¥203,632.¥145,600Current price is: ¥145,600.GR Yaris GXPA16 (G16E-GTS) ORC Metal Twin Clutch ORC-559DB-TT1818-SEOut of stock
-
GAZOO Racing Parts for Toyota Yaris GR
Original price was: ¥606,106.¥595,706Current price is: ¥595,706.GAZOO/TRD Parts for GR Yaris -
GR Reinforced Metal Clutch & Cover Set for GR Yaris
Original price was: ¥182,791.¥176,800Current price is: ¥176,800.GR Yaris FACTORY CLUTCH UPGRADE
Reviews
There are no reviews yet.