GARAGE VARY Body Kit for Toyota GR YARIS
Original price was: ¥296,400.¥284,960Current price is: ¥284,960.
GARAGE VARY Body Kit [FRP] for Toyota GR YARIS includes Front lip spoiler + Side Step + Rear Roof Spoiler
Individual parts also can be purchased. See the prices below.
This can be shipped via economy sea shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered with this shipping, we may request an additional shipping charge after the buyer place the order. We can combine shipping if you need to purchase multiple items. To do so, please contact us before or after placing the order.
Description
GR YARIS front bumper (FRP) & front lip (twill weave carbon) set – 273,000 yen
GR YARIS front bumper (FRP) & front lip (FRP) set – 163,000 yen
*Unpainted only.
* Front bumper White gel FRP
front lip Clear gel coat Twill weave carbon buff finish
The front bumper and front lip are separated.
Front lip spoiler [FRP] – 86,000 yen / [CARBON] – 147,600 yen
Center down amount 35 mm Side down amount 30 mm Width 25 mm (total length change)
* Only unpainted.
FRP: Made of a white gel coat FRP
Carbon: Clear gel coat made of twill weave carbon (buff finish)
Accessories
・ Cut tape adhesive 10 mm x 1 m 3 pieces
・ 10 5×16 tapping screws
Side Step [FRP] – 97,000 yen / [CARBON] – 185,000 yen
Attach it by covering it with a genuine sidestep. 35 mm down from the genuine side step, 25 mm in width (no change in overall width)
* Only unpainted.
FRP: Made of a white gel coat FRP
Carbon: Clear gel coat made of twill weave carbon (buff finish)
accessories
・ Cut tape adhesive 10 mm x 1 m 4 pieces
・ 14 5×16 tapping screws
Rear Roof Spoiler [FRP] – 91,000 yen / [CARBON] – 155,000 yen
It will be a replacement type with a genuine roof spoiler. The high-mount lamp is used as a genuine product.
* The high-mount lamp of the demo car is painted with smoke.
15mm long from the genuine roof spoiler.
* Only unpainted.
FRP: Made of a white gel coat FRP.
Carbon: Clear gel coat made of twill weave carbon (buff finish)
accessories
・ Cut tape adhesive 10 mm x 1 m 1 piece
・ 5 6×20 flange bolts
・ Two 4×12 truss bolts
Gate Spoiler [FRP] – 73,800 yen / [Weave carbon] – 145,500 yen / [Plain Weave CARBON] – 123,500 yen
It’s 70mm longer than genuine.
*Unpainted only.
*Three types are available Clear gel FRP, Coat twill weave carbon (buff finish), and Clear gel coat plain weave carbon (buff finish)
Accessories
・Cut-type tape adhesive 10mm x 1m 4 pieces
Rear Diffuser [FRP] – 86,000 yen / [CARBON] – 152,000 yen
It will be a replacement type with a genuine rear diffuser. The back lamp is used as a genuine product.
* The back lamp of the demo car is painted with smoke.
* Because the product covers the lid of the tow hook, the tow hook cannot be used.
* The center diffuser is attached to the third and subsequent photos.
15mm protrusion width from genuine bumper (changes to overall length)
* Only unpainted.
FRP: Made of a white gel coat FRP
Carbon: Clear gel coat made of twill weave carbon (buff finish)
accessories
・ Two 5×20 truss bolts
・ 2 M5 nuts
・ Two M5 plain washers
・ Two M6 flange bolts
・ 2 8mm spacers
・ 3 clips
Center Diffuser [FRP] – 42,000 yen / [CARBON] – 83,500 yen
This can be installed on VARY Garage Rear Diffuser.
The first image is equipped with a genuine muffler.
Since it is manufactured on a genuine muffler base, the processing is required for vehicles equipped with an external muffler.
*The 2nd and is wearing Blitz’s NUR-SPEC CUSTOM EDITION Muffler.
It is necessary to cut the product for the muffler where the drum is wider than the genuine muffler hanger position.
20mm lower than the genuine bumper (left and right fins)
*Unpainted only.
* Clear gel coat twill weave carbon (buff finish)
Accessories
・4 M6 flange nuts
・2 M6 clip nuts
・2 M6x12 flange bolts ・2 6×15
slim head bolts
・2 M6x20 flange bolts
Rear Duct Pannel [FRP] – 46,500 yen [Plain Weave CARBON] – 93,500 yen
Cut and install the rear bumper.
*Unpainted only.
* Made of clear gel coat plain weave carbon (buff finish)
accessories
・Two pieces of cut-type tape adhesive 10mm x 1m
・8 stainless steel 4×16 tapping screws
・Aluminum mesh
Front Fender [FRP] – 152,000 yenÂ
It will be a replacement type with a genuine fender. The demo car is painted in the same color as the body and gunmetal.
Since it has a width of 9 mm on one side, it comes with a panel (made of urethane) that hides the difference from the front bumper.
* Only unpainted.
* Main body made of white gel coat FRP
accessories
・ Cut tape adhesive 10 mm x 1 m 1 piece
・ Two 5×16 tapping screws
・ Two 6×15 truss bolts
・ 2 M6 flange bolts
Rear Fender [FRP] – 69,500 yenÂ
It will be installed by covering it with a genuine rear fender.
15mm on one side
* The demo car is painted on the gunmetal.
* Only unpainted.
* Made of white gel coat FRP
accessories
・ Cut tape adhesive 10 mm x 1 m 5 pieces
・ 4 6×20 slim head bolts
・ 4 M6 flange bolts
Canard [FRP] – 33,000 yen / [CARBON Twill wave ] – 52,900 yen / [CARBON Plain wave ] – 49,900 yenÂ
* Only unpainted.
* Clear gel coat made of twill weave carbon (buff finish)
accessories
・ 10 slim head bolts
・ 10 M6 nuts
GR YARIS eyelid [FRP] – 26,500 yenÂ
* Only unpainted.
* White gel coat FRP
accessories
-Cut type tape adhesive 10 mm x 1 m 4 pieces
GR YARIS eyelid [CARBON Twill wave ] – 44,900 yen / [CARBON Plain wave ] – 38,900 yen
* Only unpainted.
* Clear gel coat made of twill weave carbon (buff finish)
Accessories
・ Cut tape adhesive 10 mm x 1 m 4 pieces
GR YARIS bonnet duct rain guard set [FRP] – 44,900 / [CARBON Twill wave ] – 77,900 yen / [CARBON Plain wave ] – 66,900 yen
Cut and attach the genuine bonnet with the attached paper pattern.
* It is recommended to use the bonnet damper as the genuine support rod cannot be used.
Rain guard attached to genuine bonnet Image (Images 4 and 5)
Attached to our original bonnet Image Image 6
* Only unpainted.
* Clear gel coat made of twill weave carbon (buff finish)
* Rain guard made of black gel FRP
Accessories
・ Cut tape adhesive 10 mm x 1 m 3 pieces
・ 4×16 tapping screw (stainless steel) 16 pieces
GR YARIS bonnet [CARBON Twill wave ] – 207,900 yen / [CARBON Plain wave ] – 185,900 yen
* Only unpainted.
* Clear gel coat plain weave carbon (buff finish)
Weight approx. 7.5 kg
Accessories
・ 2 hood support rods
・ 4 6x16x1.6 washers
・ 4 M6 flange nuts
GR YARIS Nose Cover [CARBON Twill wave] – 33,900 yen / [CARBON Plain wave] – 27,900 yen
* Only unpainted.
* Clear gel coat plain weave carbon (buff finish)
Accessories
・ Cut tape adhesive 1m 2 pieces
GR YARIS GT Roofing Wing (FRP)Â – 87,900 yen / (Carbon) – 174,000 yen
* Only unpainted.
* White gel coat FRP / Made of plain weave carbon Clear gel coat finish
Accessories
・Cut-type double-sided tape 3 pieces. ・6 x 35 slim head bolts 5 pieces ・6 x 30 Slim head bolt 2 pieces ・Flange nut 7 pieces
FRONT Under Panel – 69,500Â yen.
*Unpainted only.
*Body made of black gel coat FRP
Accessories
・4 x 6×15 truss bolts ・4 x 6mm washers ・6 x 4×16 truss bolts ・4 x 5×15 truss bolts ・4 x 5mm washers ・ 4 x 5mm spring washers
You must be logged in to post a review.
Reviews
There are no reviews yet.