Description

VATO-330 Front Spoiler –  185,000 yen 
Material: CARBON＋
CARBON+ refers to carbon parts produced by VARIS’s original vacuum-forming method. These products are stronger and lighter than normal CARBON.

VATO-331 Side under skirt [Left/Right] Set  –  229,000 yen 
Material: CARBON＋
CARBON+ refers to carbon parts produced by VARIS’s original vacuum-forming method. These products are stronger and lighter than normal CARBON.

VATO-332 Rear Skirt [FLAT BLACK (paint finish)] – 156,800 yen
Material: FRP
Ducted to avoid the accumulation of turbulent air. Matte Black Paint Finish.

VATO-333 Rear Skirt ～Non paint(gel coat finish) – 110,200 yen
Material: FRP
Ducted to avoid the accumulation of turbulent air.

VATO-334 CARBON HEAT SHIELD [Left /Right] SET – 57,400 yen
Material: Carbon
Protects the rear skirt from heat damage caused by exhaust heat from the muffler.

VATO-335 Rear Roof Wing with variable flap [Painted] – 218,000 yen
Material: FRP&CARBON＋
5 degrees of wing flap angle adjustment. The upper portion of the spoiler is made of carbon.

VATO-337 GT-WING for GR YARIS ~Hyper Narrow II 1200mm~ & Wing Base SET – 295,000 yen
Material: FRP&CARBON＋
1: Compliant with safety standards, wing body weighs 1.5kg
Note 2: Orders made on or after May 1,2024 will be changed from 1200 mm to 1230 mm.

VATO-338 GT-WING ~Hyper Narrow II 1200mm~ Wing body – 185,000 yen
Material: FRP&CARBON＋
Note 1: For replacement of wing part only when R/Wing VATO-335 is already installed/Wing body 1.5kg
Note 2: Orders made from May 1, 2024, will be changed from 1200 mm to 1230 mm.

VATO-336 FENDER TRIM FRONT/REAR  SET –  98,400 yen
Material: FRP
Conforms to safety standards. 8 mm wide on each side. For cars with larger wheels, our fenders make it easier to meet safety standards that prohibit wheel protrusion from the fender.
=Note= We cannot guarantee compliance with your local safety standards and the wheel fitment depends on wheel size, tire size, camber angles, and toe-in/out angles.
(*4 is mainly for users in Japan.)

FENDER TRIM REAR SET –  INCLUDED above Set
Material: FRP
Conforms to safety standards. 8 mm wide on each side. For cars with larger wheels, our fenders make it easier to meet safety standards that prohibit wheel protrusion from the fender.
=Note= We cannot guarantee compliance with your local safety standards and the wheel fitment depends on wheel size, tire size, camber angles, and toe-in/out angles.
(*4 is mainly for users in Japan.)

VBTO-150 COOLING BONNET HOOD –  267,000 yen
Material: CARBON+
The original bonnet weighs 6.1kg. Varis CARBON + bonnet weighs 3.9kg. Rain guard & Stand Bar included.

COOLING BONNET HOOD WHEN OPENED
Material: CARBON+
The original bonnet weighs 6.1kg. Varis CARBON + bonnet weighs 3.9kg. Rain guard & Stand Bar included.

LINER THROTTLE SYSTEM “L.T.S.III” – 49,550 yen
Electronic throttle controller “L.T.S.Ⅲ” + “L.T.S.Ⅲ” option back canceller harness

SHIFT KNOB – 19,000 yen
For Manual cars only