HKS OIL COOLER KIT S-Type for Toyota 86 2012/04~2016/07
Part Number: 15004-AT011
For install in the Right Fender
Please select per-product shipping when placing the order. This can be shipped via economy air shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered with this shipping, we may request an additional shipping charge after the buyer places the order.
Appropriate oil temperature control is necessary to enjoy driving
An excessive rise in oil temperature causes the breakdown of the oil components, which reduces the important performance of lubricating, cooling, and cleaning the inside of the engine. The HKS oil cooler stabilizes the oil temperature with its excellent cooling effect and incorporates performance that maximizes the engine output in its basic design.
General-purpose oil cooler kit
Two types are set: R (replacement) type, which moves the oil filter, and S (sandwich) type, which sandwiches the attachment between the oil filters.
■ The thermostat’s function controls the oil temperature.
Since the HKS oil cooler uses a core with an excellent cooling effect, it is equipped with a thermostat to prevent engine oil viscosity resistance increase due to overcooling. (Excluding some models).
This thermostat has a good response to temperature changes and has a relief function. When the oil exceeds the set temperature of the thermostat, it flows to the core and is cooled. If it is lower than that, the oil temperature suitable for the engine is maintained by bypassing the core.
◆ Thermostat valve operation start temperature 70℃ (±3℃)
◆ Thermostat valve fully closed temperature 80℃ (±3℃)
■ Combining a relief function with a thermostat, consideration is also given to safety measures in the event of an emergency.
When the oil pressure rises abnormally due to crushing of the core, clogging of the line, etc., the oil is relieved from the thermostat, bypassing the core, protecting the engine, and preventing damage to the line.
■Stainless steel mesh hose is used for the oil line, emphasizing durability.
The stainless steel mesh hose used in the kit can be cut to the appropriate length according to the vehicle model and layout to be installed.
Integrated thermo function and outlet. HKS oil cooler S (sandwich) type with a compact number of parts and excellent installation workability.
Sandwich with attachment and integrated adapter hemofilter.
Installation work is easy by reducing the number of parts as much as possible.
The HKS oil cooler S type is a type of oil cooler that sandwiches an attachment with a built-in thermostat with an oil filter, offering excellent cost performance.
[Oil temperature gauge: Oil pressure gauge mounting hole]
●Adapter Thermo: M12×P1.25 (1 hole), PT1/8 (1 hole)
Precautions when installing the general-purpose oil cooler kit
There is a car model that does not fit depending on the car model.
Before purchasing, please check the fitment of the vehicle model to be installed according to the following items.
1. Oil filter mounting screw size
Can be attached to 3/4-16UNF or M20×P=1.5.
2. Attachment mounting part
The following clearance is required for the attachment mounting part of the engine block. (Unit: mm)
3. Oil filter
The mounting screw should not protrude from the O-ring of the genuine filter.