HPI Full-Fledged Patented Floor Bar Series
JPY, ¥39,188
Left and right set: 59,000 yen
* Excluding some models
Please specify the color in the order note section when ordering
Please select per-product shipping when placing the order. This can be shipped via economy air shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered with this shipping, we may request an additional shipping charge after the buyer places the order.
Description
Overview
A floor reinforcement bar that allows you to fasten your seat belt without processing the vehicle. Vehicle rigidity is increased by passing floor bars to the left and right of the driver’s seat and passenger seat.
(For the shoulder belt, please use the mounting bolt holes of the genuine belt in the rear seat.)
* Please use according to various regulations during competition.
The 6-point belt can be attached without processing the vehicle, and the vehicle value does not decrease!
Product rigidity is high and vehicle rigidity is also improved!
[KIT contents] Driver/passenger seat floor bar body, eyebolts x 4, spring washers x 4, dedicated spacers
* Molded on Japanese cars
* Shoulder belts should use the genuine belt mounting bolt holes on the rear seats ..
* The shapes of the driver’s seat and the passenger seat are different. (Excluding some models)
* The height of the floor bar body is 30 mm, so if the seat rails are installed below that, it may interfere with the bar, so please check the clearance. Please.
| Car Name | Car Model | type | part number | remarks |
| Skyline GTR | BNR32 BNR34 |
Driver’s seat (passenger seat) | HPFB-BNR32-R (L) | R34GTR V-spec II (including nur) cannot be installed because the floor shape is different. Some cutting is required. Custom processing is required when using RECARO Super Low Posi. (Processing fee: 18,000 yen/piece) |
| Left and right set | HPFB-BNR32-SET | |||
| Skyline GTR | BCNR33 ECR33 (2 doors) |
Driver’s seat (passenger seat) | HPFB-BCNR33-R (L) | *In the case of a genuine seat, if the seat is lowered to the last part, it may contact the bar body. Custom processing is required when using RECARO Super Low Posi.(Processing fee: 18,000 yen/piece) |
| Left and right set | HPFB-BCNR33SET | |||
| GT-R | R35 | Driver’s seat (passenger seat) | HPFB-R35-R (L) | One: 43,000 yen /Left and right set: ¥70,500 yen 2018 Pure Edition (confirmed only on the driver’s side), 2007 model, 2010 model, 2017 Year version NISMO model (driver’s seat, passenger seat confirmed) *In the case of RECARO seats, some processing is required. |
| Left and right set | HPFB-R35-SET | |||
| skyline | ECR33 (4 doors) | Driver’s seat (passenger seat) | HPFB-ECR33-R (L) | First-year October 1994 Vehicle (E-ECR33 4 door) Modeling with genuine seat rails |
| Left and right set | HPFB-ECR33-SET | |||
| Fairlady Z | Z33 | Driver’s seat (passenger seat) | HPFB-Z33-R (L) | First-year February 2008 Modeling with vehicle BRIDE seat rails and genuine seat rails |
| Left and right set | HPFB-Z33-SET | |||
| Z34 | Driver’s seat (passenger seat) | HPFB-Z34-R (L) | *Additional work is required when installing genuine seat rails. Please inquire separately about the price, etc., as it can be purchased with additional machining specifications. |
|
| Left and right set | HPFB-Z34-SET | |||
| Silvia | S14/S15 | Driver’s seat (passenger seat) | HPFB-S15-R (L) | Molded with Blit seat rails, RECARO unconfirmed (2021.01) |
| Left and right set | HPFB-S15-SET | |||
| march nismo | K13 K13kai |
Driver’s seat (passenger seat) | HPFB-K13-R (L) | Modeling with genuine seat rails and BRIDE seat rails |
| Left and right set | HPFB-K13-SET | |||
| notebook nismo | E12S | Driver’s seat (passenger seat) | HPFB-E12S-R (L) | Modeling with genuine seat rails and BRIDE seat rails |
| Left and right set | HPFB-E12S-SET | |||
| Notebook
e-power Nismo |
E12EP | Driver’s seat (passenger seat) | HPFB-E12EP-R (L) | *Not suitable for vehicles without a PTC heater. We are currently verifying commonality. 2019.2/27 |
| Left and right set | HPFB-E12EP-SET | |||
| Toyota 86
Subaru BRZ |
ZN6/ZN8 ZC6/ZD8 |
Driver’s seat (passenger seat) | HPFB-ZN6V2-R (L) | *Incompatible with genuine seat rails. |
| Left and right set | HPFB-ZN6V2-SET | |||
| Lexus IS-F | USE20 | Driver’s seat (passenger seat) | HPFB-USE20-R (L) | Modeling with genuine seat rails and BRIDE seat rails Modeling with the previous term USE20 vehicle. |
| Left and right set | HPFB-USE20-SET | |||
| GR Yaris Yaris |
GXPA16 MXPA10 |
Driver’s seat (passenger seat) | HPFB-GXPA16-R (L) | Modeling with genuine seat rails and BRIDE seat rails Modeling with GR Yaris (MT car registered in October 2020) Modeling with Yaris (MT car registered in May 2020) |
| Left and the right set | HPFB-GXPA16SET | |||
| Copen | LA400K | Driver’s seat (passenger seat) | HPFB-LA400K-R (L) | Modeling with genuine seat rails, BRIDE, and Kawai S/S seat rails Modeling with first-year H30/08 vehicle |
| Left and right set | HPFB-LA400KSET | |||
| alto works | HA36S | Driver’s seat (passenger seat) | HPFB-HA36S-R (L) | Molded with genuine seat rails and BRIDE seat rails *Compatibility confirmed for both FF and 4WD vehicles |
| Left and right set | HPFB-HA36S-SET | |||
| swift | ZC33S | Driver’s seat (passenger seat) | HPFB-ZC33-R (L) | Molding with CBA-ZC33S (H30.2, 6MT), DBA-ZC83C (R1.7, CVT) normal sheet |
| Left and the right set | HPFB-ZC33-SET | |||
| ZC32S | Driver’s seat (passenger seat) | HPFB-ZC32-R (L) | Model CBA-ZC32S, model year June 2013 Modeling with genuine seat rails |
|
| Left and right set | HPFB-ZC32-SET | |||
| N-ONE | DBA-JG1 | Driver’s seat (passenger seat) | HPFB-JG1-R (L) | Modeling with genuine seat rail Modeling with the vehicle in the first year of 2013/01 |
| Left and right set | HPFB-JG1-SET | |||
| S660 | JW5 | Driver’s seat (passenger seat) | HPFB-JW5-R (L) | April 2016, molding with BRIDE & genuine sheet |
| Left and right set | HPFB-JW5-SET | |||
| Impreza | GDB | Left and right set | Build-to-order manufacturing |
[KIT Contents] Driver’s/passenger’s seat floor bar body
, eyebolt x 4, spring washer x 4, special spacer .
*The shapes of the driver’s seat and passenger’s seat are different. (Excluding some models)
*The height of the floor bar body is 30mm, so if the seat rail is installed below that height, it may interfere with the bar, so please check the clearance. Please.
*We also accept one-off production, so please contact us.
You must be logged in to post a review.
Related products
-
TOM’S Boost UP Parts POWER BOX
JPY, ¥54,131Racing Suspension Kit for Lexus GS F, Lexus LC and Lexus RC-F -
TOM’S Tuning Computer TECⅡ
JPY, ¥297,825TOM'S Accelerator Pedal for Toyota 86 -
Cusco shift lever movement kit for Toyota GR Yaris
JPY, ¥20,900GR Yaris GXPA16 -
HKS Super Turbo Muffler for GR Yaris
JPY, ¥188,100Toyota GR YARIS 4BA-GXPA16 -
TOM’S Accelerator Pedal
JPY, ¥8,360TOM'S Accelerator Pedal for Toyota 86 -
MUGEN HEXAGON OIL FILLER CAP
JPY, ¥13,585Oil filler cap
Reviews
There are no reviews yet.