Description

Dry carbon front spoiler for GR Yaris [ L866-1 ] – 170,000 yen / [Painted] -195,670 yen
Aiming for a low-down effect, we will complete a simple yet fearless front view.
Material: Dry carbon (autoclave manufacturing method)
Carbon grain: Twill
LEMS carbon studio [LEMS original made in Japan]
・ Desorption after installation can be easily removed by turning on the bolt, so it is suitable for heavy snowfall areas.
・ Approximately 15mm down from the original

[Product set contents]
・ Dry carbon front spoiler (twill)
・ 6 fixing bolts
・ 6 nutters
・ LEMS carbon logo plate
・ Installation manual
・ Instruction manual

[Compatible model]
・ GR Yaris (2020 ) July ~)

Dry carbon side-splitter left and right set  [ L867 ] – 135,000 yen  / [Painted] – 195,000 yen
Sharp design that tightens the bottom line while taking advantage of the normal atmosphere.
The front spoiler and rear under splitter can be installed at the same time to give the exterior a sense of
unity.
Material: Dry carbon (autoclave manufacturing method)
Carbon grain: Twill
Fiber produced at LEMS Carbon Studio [LEMS original made in Japan]
・Mounting is fixed with tapping screws and genuine bolts.
・Approximately 15mm down from the original

[Product set contents]
・ Dry carbon side-splitter (twill) left and right
・ Tapping 14 pieces
・ LEMS carbon logo plate
・ Installation manual
・ Instruction manual

[Compatible model]
・ GR Yaris (July 2020- )

Dry carbon rear under splitter left and right set [ L868-1 ]- 66,500 yen / [PAINTED] 85,500 yen
It is a part that compactly summarizes the insistence on functionality and looks. By installing it, you can casually contribute to the low and wide styling of the rear.
Material: Dry carbon (autoclave manufacturing method)
Carbon grain: Twill
fiber produced at LEMS Carbon Studio [LEMS original made in Japan]
・ Mounting is fixed with tapping screws and genuine clips.
・ Approximately 15mm down from the original

[Product set contents]
・ Dry carbon rear under splitter (twill) left and right
・ Two tappings
・ LEMS carbon logo plate
・ Installation manual
・ Instruction manual

[Compatible model]
・ GR Yaris (July 2020) ~)

Dry carbon rear number frame – 45,500 yen
The rear number frame of LEMS is installed without covering the outside of the number.
Since the outer frame of the number itself can be attached as it is, the number can be fixed in a more natural atmosphere.
Using dry carbon creates a sense of luxury and sportiness.
Carbon uses twill weave and is UV clear painted.
* You can reseal the number at the Transport Branch Office in your area.
When it is sealed, please purchase a bolt for fixing the number frame at the Transport Branch Office.

Material: Dry carbon (autoclave manufacturing method)
Carbon eyes: Twill
[LEMS original made in Japan]

[Accessories]
・ Installation instructions
・ 2 rubber spacers
As shown in the photo below, with the number of bolts on the body surface and the side to be installed Please tighten them together.