Mugen Aerodynamics for Honda Fit 2022
Original price was: ¥239,500.¥230,000Current price is: ¥230,000.
styling set for Dash: A 3-piece set of the front under spoiler/side spoiler/rear under spoiler
This can be shipped via sea shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered with this shipping, we may request an additional shipping charge after the buyer places the order. We can also ship via DHL, UPS, or FedEx
Description
Front Under Spoiler – 92,500 yen / [Unpainted] – 81,500 yen
The front under spoiler has a wide and low design that allows you to feel the difference at a glance, with the image of a casual sports car. By adding a wide impression to the front mask, it gives off a sporty personality that is typical of Mugen. Two-tone paint job: body color and gloss black.
Approximately 40mm lower than the standard front bumper.
*Please attach it before applying the body coat. Installation requires processing on the vehicle side such as cutting and drilling.
Mode : eB(FF/4WD),eH(FF/4WD),eR(FF), eL(FF/4WD), B(FF/4WD), H(FF/4WD), L(FF/4WD)
Side spoiler – 70,500 yen / [Unpainted] – 59,500 yen
A simple and stylish side spoiler that connects the front and rear. Achieves smart styling that matches the accent 2-tone specifications. Made of vacuum-formed PPE. Colored paint finish (5 colors available).
*Please attach it before applying the body coat.
Mode : eB(FF/4WD),eH(FF/4WD),eR(FF), eL(FF/4WD), B(FF/4WD), H(FF/4WD), L(FF/4WD)
Rear under spoiler -76,500 yen / [Unpainted] – 65,500 yen
A stylish rear under spoiler that gives a sporty accent to the rearview. Achieves smart styling that matches the accent 2-tone specifications. Made of vacuum-formed PPE. Colored paint finish (5 colors available).
*Please attach it before applying the body coat. Installation requires processing on the vehicle side such as cutting and drilling.
Mode : eB(FF/4WD),eH(FF/4WD),eR(FF), eL(FF/4WD), B(FF/4WD), H(FF/4WD), L(FF/4WD)
Rear under spoiler -84,000 yen / [Unpainted] – 73,000 yen
Wing spoiler attached to the top of the tailgate. The roofline has been extended into a silhouette that creates a wing design with a strong presence, creating a sporty style. The MUGEN logo is laid out in the center of the spoiler. Made of blow-molded ABS. Colored paint finish (5 colors available).
*Please attach it before applying the body coat. Installation requires processing on the vehicle side such as cutting and drilling.
Mode : eB(FF/4WD),eH(FF/4WD),eR(FF), eL(FF/4WD), B(FF/4WD), H(FF/4WD), L(FF/4WD)
Front Grill Garnish – 30,000 yen
The front grill garnish has a simple design but brings out the sportiness of the RS and gives the front mask a presence. Available in Premium Crystal Red Metallic, which emphasizes the RS, and Berlina Black, which gives off a fearless impression.
*Please attach it before applying the body coat. Installation requires processing on the vehicle side such as cutting and drilling.
Mode : eB(FF/4WD),eH(FF/4WD),eR(FF), eL(FF/4WD), B(FF/4WD), H(FF/4WD), L(FF/4WD)
Carbon Tailgate Garnish – 95,800 yen
Carbon tailgate garnish that is installed over the standard tailgate garnish. Achieving sporty styling with a simple rear view. Made of dry carbon. UV cut clear coat finish.
*Please attach it before applying the body coat. Installation requires processing on the vehicle side such as cutting and drilling.
All types (FF/4WD)
Tailgate Garnish – 50,700 yenÂ
A tailgate garnish is installed over the standard tailgate garnish. Achieving sporty styling with a simple rear view. Made of vacuum-formed ABS. Glossy black paint finish.
*Please attach it before applying the body coat. Installation requires processing on the vehicle side such as cutting and drilling.
All types (FF/4WD)
Carbon Door Mirror Garnish –Â 54,000 yen
A carbon door mirror cover that creates a sporty look by adding a fin shape to the dry carbon material. The surface is finished with a UV-blocking clear coat to prevent deterioration such as fading. Includes Mugen logo.
All types (FF/4WD)
Fender Decal – 11,700 yenÂ
The design uses an air outlet motif to create a sporty side view. By making the shape match the edge of the side window, the design gives the side window a more relaxed appearance. Includes Mugen logo. Set of 2 left and right.
All types (FF/4WD)
Door Side Decal – 21,700 yenÂ
Adopts a relaxed design from front to rear. The rear door part of the decal is designed with an air inlet motif, creating a sporty side view. Includes Mugen logo. Set of 4 left and right.
All types (FF/4WD)
Tailgate Decal – 11,700 yenÂ
A tailgate garnish is installed over the standard tailgate garnish. Achieving sporty styling with a simple rear view. Made of vacuum-formed ABS. Glossy black paint finish.
*Please attach it before applying the body coat. Installation requires processing on the vehicle side such as cutting and drilling.
Mode : eR(FF)/ R(FF)
Door Visiors with Mugen emblem – 33,000 yen / [Without Emblem] – 25,700 yenÂ
Ventilated visor with excellent ventilation performance. In the case of a typical door visor, when the window is used with the window slightly lowered, the air discharged from the front of the opening becomes a vortex and tends to flow back into the room from the rear of the opening.
The ventilated visor uses a rubber blade attached to the lower end of the front visor body to keep the rear of the visor closed even when the window is slightly lowered (*), and by limiting the opening to the front, the air is emitted from the room. prevent backflow of air.
Furthermore, the negative pressure generated during driving helps to efficiently expel air. The visor also greatly improves the comfort of using it as a visor, by preventing raindrops that tend to enter when the window is opened and rainwater splashed up by other vehicles from entering.
Made of smoked acrylic. Set of 4 front/rear.
*If the top edge of the window is above the rubber blade
All types (FF/4WD)
Tailgate Garnish – 50,700 yenÂ
A tailgate garnish is installed over the standard tailgate garnish. Achieving sporty styling with a simple rear view. Made of vacuum-formed ABS. Glossy black paint finish.
*Please attach it before applying the body coat. Installation requires processing on the vehicle side such as cutting and drilling.
Mode : eR(FF)/ R(FF)
High-performance air filter – 21,500 yen / [Filter maintenance kit] – 6,300 yen
Filter maintenance kit – A set of dedicated filter washers (spray) and filter oil (aerosol).
High-performance air filter. By adopting the filter material used in SUPER GT and SUPER FORMULA participating vehicles, the suction resistance is improved by about 10% compared to the normal, and an excellent response is realized. It can be used repeatedly by cleaning with the filter maintenance kit (sold separately).
High-performance oil element –Â 4,860 yen
Pressure loss is improved by up to 10% (compared to normal) by optimizing the filter media area, filter media storage shape, etc. in order to remove sludge (foreign matter) generated inside the engine as much as possible. Furthermore, by adopting a filter medium with a Y-shaped cross-section of the filter medium fiber, sludge (foreign matter) is efficiently removed, and wear inside the engine is prevented. In addition, by using highly heat-resistant acrylic rubber (gasket) and silicon rubber (anti-drain), it can handle the high oil temperature conditions of the engine.
Aluminum Wheel CU10 – 225,600 yen / 4 wheels
Black Mirror Face / 17 × 7J Inset 60
Newly designed 17-inch aluminum wheel “MDE”. The spokes are constructed with lines that match the organic shape of the vehicle. The cutting surface is placed around the outer periphery of the wheel, creating a design that aims for a size larger than an inch. A black mirror face with a clear-coated cut surface and a glossy black two-tone finish. By applying a spinning process to the rim, it maintains high rigidity while being thin. In addition, an undercut treatment is applied to the back side of the spokes on the inside of the rim to reduce weight, and cutting lines are added to give the underfoot a sporty look. The size is 17 x 7J inset 60. Recommended tire size 205/40R17
*Standard wheel nuts cannot be used. When selecting tires, the LI value may differ depending on the tire. When replacing tires, be careful to ensure that the load capacity (LI/load index) is equal to or higher than the standard tires, and check the compatibility chart of each tire manufacturer.
Compatible tire example Size: 205/40R17 84W (XL standard) Air pressure: FR 270kPa, RR260kPa
eB(FF/4WD),eH(FF/4WD),eR(FF), eL(FF/4WD), B(FF/4WD), H(FF/4WD), R(FF), L(FF/4WD)
Wheel Nut & Lock Set (Black) -13,360yen
Wheel Nut & Lock Set (Silver) -11,150 yen
You must be logged in to post a review.
You may also like…
-
Honda Genuine Accessories for Fit 2021
Original price was: ¥58,760.¥56,160Current price is: ¥56,160.Genuine Original Fit Accessories -
Mugen Aerodynamics Skip for Honda Fit
Original price was: ¥217,360.¥194,688Current price is: ¥194,688.Mugen Styling Body Kit
Reviews
There are no reviews yet.