Description

Front under spoiler [Painted]  – 100,000 yen / [Un Painted]  – 95,000 yen
Part Number: 71110-XNCF-K0S0-CB

Side Garnish -[Painted]  – 125,000 yen / [Un Painted]  – 120,000 yen
Part Number: 75300-XNCF-K0S0-ZZ

Rear Under Spoiler – [Painted]  – 135,000 yen / [Un Painted]  – 130,000 yen
Part Number: 84111-XNCF-K1S0-CB

OPTIONAL PARTS

Carbon Aero Bonnet – 1,220,000 yen
Part Number: 60100-XNCF-K0S0
After computer analysis, the shape of the bonnet and the size and position of the air outlet is determined. Developed by conducting actual running tests on the circuit to confirm the best performance. Efficiently dissipates heat in the engine room and combines it with other infinite aero parts to achieve higher aerodynamic performance.

The backside of the bonnet is made of dry carbon as well as the front side, and the inner rib is the same as the normal one to ensure sufficient strength. In addition, a drainage hole is installed at the tip so that rainwater that has entered from the air outlet does not directly hit the engine room. Made of dry carbon. UV cut clear paint finish. Compatible with normal strikers.
* Weight: Approximately 6.0 kg (normal approximately 9.9 kg)

Wing Spoiler – [CARBON] – 1,110,000 / [FRP] – 350,000 yen
Part Number: 84112-XNCF-K0S0/84112-XNCF-K1S0
After computer analysis, we carefully investigated the “height”, “angle”, and “wing cross-sectional shape” of the wing, and developed it by conducting an actual running test on the circuit like the bonnet. The CLR value (lift coefficient/rear) has been improved without increasing the CD value (air resistance coefficient). In addition, downforce can be controlled by adjusting the angle in 4 steps. Two types with the same shape, made of dry carbon (CFRP) and made of glass fiber (GFRP), are available.

• Weight: CFRP approx. 2.5 kg, GFRP approx. 3.6 kg (normal approx. 5.8 kg)

Tailgate Spoiler – 135,000 yen
Part Number: 84112-XNCD-K0S0

Door Mirror Cover – 92,000 yen
Part Number: 76205-XNL -K0S0
Online Purchase from Here

Ventilated Visor – 35,000 yen

Sports Silencer e：HEV（4WD）- 880,000 yen
Part Number: 18000-XNCF-K1S0

Aluminum Wheel MDCF – 175,000 yen / One Wheel

Cutting and forging wheel “MDCF” designed exclusively for CIVIC TYPE R. By cutting and forging, weight reduction and high rigidity are realized. Two sizes are available: 20 x 8.5J inset 45 and 20 x 8.5J inset 53. The color is a black mirror face with a two-tone finish with a cut surface and glossy black paint. Dedicated wheel nuts are sold separately. Recommended size: front inset 45, rear inset 53
The standard wheel nut cannot be used.
[20 x 8.5J inset 45 120-5H] 42700-XNCF-085A-45
[20 x 8.5J inset 53 120-5H] 42700-XNCF-085A-53

Wheel Nut & Lock Set – 20,400 yen
A set of 16 wheel nuts (taper type) and 4 locknuts. The size is M14 x P1.5 22HEX
Black
08181-XG8-K0S0-BL

PERFORMANCE DAMPER -120,680yen
“Performance Damper ®” improves steering stability by attenuating the vibration of the vehicle body and eliminating unpleasant micro-vibration and noise. Improves high-quality ride quality and steering stability, and demonstrates better athletic performance. One set for each front/rear.

Brake Pad -Type Competition [FRONT] – 48,000 yen
The effect required for high loads such as full-scale circuit driving, fading resistance is ensured, and good controllability near the limit is also realized. Left and right set for both front and rear.
45022-XMEB-K000

Brake Pad -Type Competition [REAR] – 38,400 yen
The effect required for high loads, such as full-scale circuit driving, fading resistance is ensured, and good controllability near the limit is also realized. Left and right set for both front and rear.
43022-XNCF-K000

LED Tail Light – 120,000 yen
An advanced, infinite original design tail light that uses full LEDs. By arranging the light-emitting parts that rise sharply on both sides below the outside of the tail light, it produces a low center of gravity and sportiness. The blinker lamp can select the sequential mode that emits light in a flowing manner. Installed by removing the standard tail light.

Full Bucket Seat MS-R + Seat Rail Set – 274,000 yen  [DISCONTINUED]
Highly compatible with rigidity and weight reduction, which can withstand intense lateral G in circuit driving. In addition, by optimizing the shape and thickness of urethane for each part of the body, both rigidity and comfort are achieved. Alcantara® is used for the epidermis. Clears the FIA standards required for use in the highest peak races in Japan such as SUPER GT. Safety standard compliant product.