Mugen Styling Set for Honda S2000
Original price was: ¥669,760.¥659,360Current price is: ¥659,360.
Mugen Body Parts for Honda S2000 AERO BONNET + FRONT WING + REAR WING
Individual parts also can be purchased
Description
AERO BONNET [CFRP / UV cut / clear coat finish] – 405,000 yen –
THIS PART IS DISCONTINUED
A carbon bonnet is equipped with an air outlet that can be installed at the same time as a high-performance air cleaner and box *. It is molded by the autoclave manufacturing method of all carbon prepreg, and the surface is UV-cut special clear (3 coat 3 bake finish) to suppress fading and can be used as it is with carbon cloth fiber.
AP2-100, -110 AP1-100, -110, -120, -130, -135, -200
Part Number : 60100-XGS-K0S0
Hi-PERFORMANCE AIR CLEANER & BOX – 155,200 yen
Part Number : 17200-XGS-K1S0
FRONT WING – 131,000 yen
Wing cross-section lower wing. The lower surface has an upsweep shape aimed at stability in the high-speed range. GFRP hand lay-up product. Unpainted.
AP2-100, -110 (only S2000 / S2000 typeV can be installed) AP1-130, -135, -200
Part Number: 71120-XGS-K0S0
REAR WING – 98,000 yen
Variable rear wing. Carbon fiber (CFRP) hand lay-up product with increased strength by oven humidification in the final molding process. Unpainted.
AP2-100, -110 (only S2000 / S2000 typeV can be installed) AP1-100, -110, -120, -130, -135, -200
Part Number: 84112-XGS-K2S0
HARD TOP [CFRP] – 713,000 yen / [GFRP] – 339,000 yen
THIS PART IS DISCONTINUED
The hardtop whose design was decided in the wind tunnel experiment. Two types with the same design, made of carbon (CFRP) and glass fiber (GFRP), are available. The carbon specifications are molded by the all-carbon prepreg autoclave manufacturing method, and the surface is UV-cut special clear (3 coats and 3 bake finishes) to prevent fading and can be used as carbon cloth fiber as it is. Glass fiber specifications are unpainted.
AP2-100, -110 AP1-100, -110, -120, -130, -135, -200
Part Number: 69000-XGS-K0S0 / 69000-XGS-K0S0
HYDROPHILIC LED MIRROR – 30,900 yen
The blue mirror surface with a multi-layer coating reduces the glare of ultraviolet rays and sunlight and enhances the anti-glare effect when driving at night to reduce eye fatigue. In addition, by applying a hydrophilic coat using photocatalytic technology, the attached water is diffused in a film form to ensure visibility in rainy weather.
Furthermore, a wide rear view is secured by setting the curvature to a wider angle than normal, R side: 1200R, L side: 1000R. Normal mirror pasting type. Laser printing the infinite logo on the bottom of the main unit.
AP2-100, -110 AP1-100, -110, -120, -130, -135, -200
Part Number: 76200-XGS-K0S0
NUMBER PLATE BOLTS – 4,530 yen
License plate bolt manufactured by high-quality cutting. Consists of a stainless steel head (washer collar) and bolts, and uses hexagon bolts to help prevent theft. The head size is φ20 t = 3mm, and MUGEN POWER is laser-printed. A set of two.
It cannot be attached to the letter-light type license plate.
AP2-100, -110 AP1-100, -110, -120, -130, -135, -200
Part Number: 75700-XG8-K0S0
Exhaust manifold specially developed according to the engine characteristics of F22C – 273,000 yen
The F22C has a larger displacement than the F20C due to the increased stroke. For MUGEN, it was also the start of the development of a dedicated exhaust manifold. Aiming for further power pursuit and easy-to-use engine characteristics, we repeatedly conducted dynamo tests and determined the optimum layout. By changing the primary length and set point from the exhaust manifold for F20C, power and torque are improved in the entire range from low-speed range to medium speed and top end.
AP2-100、-110
4-2-1 layout. JASMA-certified product conforming to safety standards. With heat shield. Made of all stainless steel. Weight: 6.2kg (normal 10.2kg)
Part Number: 18100-XGSB-K0S0
EXHAUST MANIFOLD for F20C engine only – 273,000 yen
Taking advantage of the ultra-high-speed engine characteristics that are the greatest feature of the F20C engine, the length from the exhaust port to the collector is optimized, and by making it completely equal length, priority is given to increased torque from 6.000 to 8.000 RPM. Combined with the collector shape, the power and torque have been improved over the entire range from medium speed to high speed.
AP1-100、-110、-120、-130、-135、-200
Part Number: 18100-XGS-K0S0
SPORTS EXHAUST SYSTEM – 284,000 yen
MUGEN has been sticking to the straight structure to the last, based on the design concept that low exhaust pressure is the ideal exhaust system. In addition to reducing exhaust resistance, high-cost glass wool with excellent durability and heat resistance is used as the sound deadening material even for difficult sound deadening technology. Welding is done by manual TIG welding to improve accuracy and durability. In addition, the weight is significantly reduced to 11.9kg compared to the normal 23kg. It is an exhaust system that deeply pursues hard and comfortable sound, titanium color, etc. as well as power and torque increase over the entire area. The mid silencer pipe is made of stainless steel and the tail silencer finisher is made of titanium. JASMA-certified product conforming to safety standards. Comes with a special metal sticker.
Pipe diameter (mm): φ60.5 → φ45.0 × 2 [t1.2]
Finisher (mm): Outer diameter φ89.1 / Inner diameter φ76.0
AP1-100、-110、-120
Part Number: 18000-XGS-K0S0
SPORTS EXHAUST SYSTEM – 284,000 yen
MUGEN has been sticking to the straight structure to the last, based on the design concept that low exhaust pressure is the ideal exhaust system. In addition to reducing exhaust resistance, high-cost glass wool with excellent durability and heat resistance is used as the sound deadening material even for difficult sound deadening technology. Welding is done by manual TIG welding to improve accuracy and durability. In addition, the weight is significantly reduced to 11.9kg compared to the normal 23kg. It is an exhaust system that deeply pursues hard and comfortable sound, titanium color, etc. as well as power and torque increase over the entire area. The mid silencer pipe is made of stainless steel and the tail silencer finisher is made of titanium. JASMA-certified product conforming to safety standards. Comes with a special metal sticker.
Pipe diameter (mm): φ60.5 → φ48.6 × 2 [t1.2]
Finisher (mm): Outer diameter φ110.0 / Inner diameter φ106.0
AP2-100、-110 AP1-130、-135、-200
Part Number: 18000-XGS-K4S0
Hi-PERFORMANCE AIR CLEANER & BOX – 155,800 yen
Normally, the air cleaner intake port is laid out behind the radiator, so it always sucks in hot air. The high-performance air cleaner & box lowers the intake air temperature, and the intake port is laid out at the front of the radiator so that more dense outside air can be guided. The volumetric efficiency inside the cylinder has been increased to achieve higher output. The airbox is a hand-laid-up product made of carbon fiber (CFRP).
AP2-100、-110 AP1-100、-110、-120、-130、-135、-200
Part Number: 17200-XGS-K1S0
FILTER ELEMENT – 21,500 yen
Repair parts for high-performance air cleaners and boxes.
Part Number: 17220-XGS-0000
OIL PAN – 49,800 yen
A normal-shaped oil pan with a baffle plate was added. Friction is reduced by suppressing the bias of the oil during high G turning, preventing the oil pump from running idle, and suppressing the agitation of the oil level.
AP2-100、-110 AP1-100、-110、-120、-130、-135、-200
Part Number: 11200-XGS-0000
LOW-TEMP THERMOSTAT – 12,800 yen
Compared to normal, by lowering the valve opening temperature, the circulation of cooling water is accelerated and the heat sagging of the engine is suppressed.
Operating temperature: 68 ° C (normal 78 ° C)
Fully open temperature: 83 ° C (normal 90 ° C)
AP1-100、-110、-120、-130、-135、-200
Part Number: 19301-XGS-0000
FAN SWITCH – 9,950 yen
Used with LOW-TEMP THERMOSTAT. Operating temperature: 80 ° C (normal 93 ° C)
AP1-100、-110、-120、-130、-135、-200
Part Number: 37760-XK5-00N0
COMPRESSOR BELT – 21,800 yen
Short size belt for air conditioners.
AP2-100、-110 AP1-100、-110、-120、-130、-135、-200
Part Number: 38920-XGS-00N0
HEXAGON OIL FILLER CAP – 14,800 yen
Machined aluminum material. 2-piece structure with hard alumite finish. A high-quality oil filler cap with infinite logo laser printed in the center. The grip uses a hexagon (hexagonal) type with excellent operability. Six colors are available: champagne gold, gray silver, red, blue, black, and orange.
AP2-100、-110 AP1-100、-110、-120、-130、-135、-200
[CHAMPAGNE GOLD] 15610-XG8-K2S0-CG
[GRAY SILVER] 15610-XG8-K2S0-GS
[RED] 15610-XG8-K2S0-R
[BLUE] 15610-XG8-K2S0-BU
[BLACK] 15610-XG8-K2S0-BL
[ORANGE] 15610-XG8-K2S0-OR
OIL FILLER CAP – 12,800 yen
Machined aluminum material. Hard alumite finish. Six colors are available: champagne gold, silver, red, blue, black, and orange.
AP2-100、-110 AP1-100、-110、-120、-130、-135、-200
[CHAMPAGNE GOLD] 15610-XG8-K1S0-CG
[SILVER] 15610-XG8-K1S0-S
[RED] 15610-XG8-K1S0-R
[BLUE] 15610-XG8-K1S0-BU
[BLACK] 15610-XG8-K1S0-BL
METAL CLUTCH DISC- 48,900 yen
The plate part uses reinforced bolts and springs, and the facing part uses a special alloy pad. Supports harsh use and high output. Achieves a direct operation feeling unique to the metal type. Used in combination with “Infinite CLUTCH COVER”. Cage thickness: t = 7.8mm
AP2-100, -110 AP1-100, -110, -120, -130, -135, -200
Part Number: 22200-XGS-00N0
LSD – 171,800 yen
Mechanical LSD that demonstrates direct driving force and excellent turning performance by differential control. A 2-way type that operates both when the accelerator is on and off. The initial torque is 13.5kg-m. Cannot be installed on VGS vehicles.
AP1-100, -110, -120, -130, -135, -200
Part Number: 41000-XGS-K0N0
LSD REBUILT KIT – 59,500 yen
For initial torque adjustment and overhaul. 6 friction discs Friction plate t = 1.7 x 4 pieces. Friction plate t = 1.8 x 4 pieces, set of 4 springs.
Part Number: 04411-XGS-00N0
PINION & SIDE GEAR SET – 51,800 yen
For LSD overhaul. A set of 4 pinion gears and 2 side gears.
Part Number: 41340-XGS-S0N0
Brake Pad -Type Sport [FRONT] – 37,500 yen
The running characteristics of a car differ depending on the weight and handling of the car. In addition, the performance required for brake pads differs depending on whether driving is mainly in urban areas or hard driving on winding roads and circuits. MUGEN has a lineup of two types of brake pads for S2000, “Type Competition” and “Type Sport”, in order to meet those various required performances.
AP2-100, -110 AP1-100, -110, -120, -130, -135, -200
[Type Competition]
For users who want to enjoy sports driving with S tires on a full-scale circuit.
Part Number: 45022-XLR-K100
[REAR] – 32,000 yen
Part Number: 43022-XKPC-K100
[Type Sport]
Usually, it is mainly for city driving, but for users who occasionally participate in winding and mini circuit driving events.
[FRONT] – 34,200 yen
Part Number: 45022-XLR-K000
[REAR] – 30,900 yen
Part Number: 43022-XKPC-K000
ACTIVE GATE BRAKE ROTOR [FRONT] – 57,300 yen
By adopting a unique cross-sectional shape called an inverted bench shape, deformation due to heat is suppressed and deformation is controlled in a direction that maintains a good pedal touch. In addition, less stress is generated inside the rotor, and crack durability due to heat is improved.
AP2-100, -110 AP1-100, -110, -120, -130, -135, -200
Part Number: 45450-XGS-K0S0
Micromesh Brake Line – 45,200 yen
Achieves both the performance of tuning parts and the same reliability and high quality as mass-produced products.
The exterior blade used for the micromesh brake line is made by twisting seven extra-fine wires to make one steel wire with a diameter of 0.21 mm, and then twisting it to make one steel wire, so it is extremely flexible. Greatly improved fatigue durability. The fitting part uses the same caulking as the normal. Achieves high reliability with no omission trouble.
AP2-100, -110
Part Number: 46400-XGSB-K0S0
AP1-100, -110, -120, -130, -135, -200
Micromesh Brake Line – 45,200 yen
Part Number: 46400-XGS-K0S0
MUGEN RESERVOIR TANK COVER – 3,200 yen
Brake and clutch reservoir tank cover that absorbs liquid leakage due to various factors while driving. Safety is ensured by using aramid refractory fiber. Design with excellent fashionability.
AP2-100, -110 AP1-100, -110, -120, -130, -135, -200
Part Number: 90000-XYL -513A
ROLLBAR REAR 5POINTS – 131,500 yen
5POINTS rear roll bar. It is also possible to open and close the soft top with a glass window. An infinite hardtop can be installed.
AP2-100, -110 AP1-100, -110, -120, -130, -135, -200
Part Number: 70020-XGS-K3S0
[OPTION] ROLL BAR COVER – 65,000 yen
Rear bulkhead garnish that integrates the roll bar and interior. Made of GFRP. Unpainted.
The rear console box cannot be used when installed.
Part Number: 84510-XGS-K1S0
Sports Mat – 153,600 yen
Auxiliary meters for water temperature, oil temperature, and oil pressure are set in the dedicated meter hood. Adopted a layout that offsets to the driver side to ensure high visibility. The meter is φ60. Consists of a sensor, harness, control unit, and switch unit. The meter hood is made of GFRP and has a matte black paint finish.
AP2-100, -110 AP1-100, -110, -120, -130, -135, -200
Part Number: 78200-XGS-K1S0
Carbon Shift Knob – 29,800 yen
The aspherical shift knob is made by laminating dry carbon on an aluminum material. The appropriate size and weight of φ50 contribute to reliable shift work. Two types of colors, red and black, are available.
[BLACK] 54102-XLT-K2S0-BK
[RED] 54102-XLT-K2S0-RD
[ORANGE] 54102-XLT-K2S0-OR
[YELLOW] 54102-XLT-K2S0-YE
Shift Knob – 15,780 yen
A shift knob manufactured by high-quality cutting. Uses a spherical shape (φ50) that gives the texture of aluminum material. Laser print the shift pattern on the top. In addition to the existing silver, new colors red and black have been added.
AP2-100, -110 AP1-100, -110, -120, -130, -135, -200
[SILVER] 54102-XLT-K4S0-GS
[BLACK] 54102-XLT-K4S0-BK
[RED] 54102-XLT-K4S0-RD
SHIFT KNOB / 6MT – 14,900 yen
Aluminum cutting product. The shift pattern is machined on the top and laid out.
AP2-100, -110 AP1-100, -110, -120, -130, -135, -200
Part Number: 54102-XG8-K1S0-S6
You must be logged in to post a review.
You may also like…
-
Mugen Styling Set for Honda Odyssey
Original price was: ¥532,272.¥521,872Current price is: ¥521,872.Mugen Styling Body Kit -
Mugen Styling Set for Honda S660 2020~
Original price was: ¥432,000.¥425,000Current price is: ¥425,000.3BA-JW5-120 -
Mugen Styling Set for Honda Civic Type R
Original price was: ¥278,304.¥270,400Current price is: ¥270,400.Mugen Styling Body Kit for FK8
Reviews
There are no reviews yet.