TRD Stylish Street Sports Body Kit for Toyota 86
¥208,000
Aero package (vehicle with standard muffler) includes GR front corner spoiler + GR side skirt + GR rear bumper spoiler
You can also purchase individual parts. See the prices below.
This can be shipped via economy sea shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered with this shipping, we may request an additional shipping charge after the buyer place the order. We can combine shipping if you need to purchase multiple items. To do so, please contact us before or after placing the order.
Description
GR front spoiler – 60,600 yen
Color : Body-color + matte black
The painted body colors are available in Crystal White Pearl: A0, Crystal Black Silica: C0, Spark Red: D0
Material: Resin (PPE)
Ground height: About 26mm down from the original
Full length: About 37mm plus from the original
GR Side Skirt – 71,600 yen
Color: Body color + matte black
The painted body colors are available in Crystal White Pearl: A0, Crystal Black Silica: C0, Spark Red: D0
Material: Resin (PPE)
Ground height: About 25mm down from the original
full length: About 15mm plus from the original
GR rear bumper spoiler – 71,600 yen
Colour: Body color + matte black
The painted body colors are available in Crystal White Pearl: A0, Crystal Black Silica: C0, Spark Red: D0
Material: Resin (PPE)
Ground height: About 15mm down from the original
full length: About 13mm plus from the original
* Can be installed with a genuine muffler.
GR sports muffler – 142,000 yen
Can be installed on the Car with GR rear bumper spoiler
GR sports muffler & GR muffler garnish set – 164,000 yen
When installing the GR sports muffler on the genuine bumper, by installing the GR muffler garnish, a simple and powerful rear view that is different from the impression when the GR rear bumper spoiler is installed will be realized.
Material [Sports muffler] Stainless steel
[Muffler garnish] Resin (PPE)
size Tail end Φ86mm (4)
Configuration: Excluding GR rear bumper spoiler (505)
Fuel lid garnish – 24,800 yen
The main body is an aluminum press specification. The plate is also made of carbon material, and it was developed with particular attention to the texture when touched, creating a smart fuel lid.
Material Body / Aluminum
plate / Carbon fiber reinforced plastic (CFRP)
GR canard – 22,600 yen
Linear handling is achieved by suppressing the roll speed during steering operation.
Material Synthetic rubber (EPDM)
GR Aero Stabilizing Cover – 32,000 yen
It fills the step between the rear glass and the boot lid and rectifies the air flowing to the boot. Improves the aerodynamic performance of the trunk spoiler.
color Black <212>
Material Resin (ABS)
GR trunk spoiler – 45,200 yen
The aggressive ducktail shape creates a sporty rear view. In addition, the shape is designed to be balanced with the front to ensure rear downforce.
Material: Resin (polypropylene)
GR fender duct fin – 36,400 yen
Colour: Matte black
Material: Resin (ABS)
It visually emphasizes the function of the GR86’s air outlet and amplifies the sports car’s character.
GR Sport Side Visor – 32,000 yen
Material Resin (acrylic)
By arranging aero-stabilizing fins in front of and behind the visor, the steering feel is improved and linear handling is achieved.
Fuel lid garnish –
The main body is an aluminum press specification. The plate is also made of carbon material, and it was developed with particular attention to the texture when touched, creating a smart fuel lid.
Material Body / Aluminum
plate / Carbon fiber reinforced plastic (CFRP)
GR carbon number frame – 24,800 yen /each
Material Carbon fiber reinforced plastic (CFRP)
Configuration
Except for vehicles with light-type license plates
GR discharge tape (aluminum tape with GR logo) – 8,500 yen
Material: Aluminum
Size : [Small] W approx. 50 mm x H approx. 25 mm
Aluminum tape with GR logo. Sticking it in 4 places on the body, removes the charge on the body and brings out the original performance of the vehicle.
GR suspension set (total length adjustable) Coil Spring Set – 54,800 yen / Shock absorber set – 240,000 yen
Ground height About 15mm down from the original
Configuration: MT car
* DLC (Diamond-Like Carbon) By electrodepositing carbon atoms on the chrome-plated part, a film with the same hardness as a diamond is formed.
Friction is reduced, and the piston rod moves smoothly even with minute movements, making the suspension work more effectively.
By adopting DLC * coating, which is also used in the field of motorsports, for the piston rod, friction is reduced, the suspension can move from a minute input, handling performance is improved and supple ride quality is achieved. Especially when steering, linear responsiveness is achieved, and ideal line tracing is achieved.
GR member brace set – 109,800 yen
By suppressing the deformation of the body, the performance of the suspension is brought out, the load is firmly transmitted to the tires, and linear handling is realized. By installing it at the same time as the GR door stabilizer, it will be even more effective.
[Mounting location]
● Front member part: 1 point fastening on one side x 1
● Front member part: 3 points fastening on one side x 2
● Rear member part: 2 points fastening on one side x 2
● Inside the rear bumper: 2 points fastening on one side x 1
GR brake pad set – 40,800 yen
Developed with priority on ease of use on the street. Special settings have been made to achieve both braking performance and comfort performance such as squeal and brake dust. With a setting that emphasizes controllability, you can experience the braking force proportional to the amount of depression (stepping force) of the brake pedal.
Configuration
MT cars, excluding GR monoblock brake kit (520)
* If a brake pad is attached, the brakes may squeak or the wheels may become dirty depending on the characteristics. Also, wear may increase.
GR Monoblock Brake Kit – 580,000 yen
Uses a monoblock caliper with 4 pots on the front and 2 pots on the rear. By increasing the size of the brake, braking force and fade resistance are improved. High control performance is achieved by adopting a dedicated brake pad. In addition, the caliper rigidity is ensured by adopting a monoblock shape.
Configuration: MT car and GR 19-inch forged aluminum wheel & tire set (with security lock nut) (510), excluding GR brake pad set (522)
[Components]
● Front monoblock caliper (4 pots facing each other)
● Rear monoblock caliper (2 pots facing each other)
● Front brake rotor (345mm in diameter)
● Rear brake rotor (330mm in diameter)
● Caliper mounting bracket (front and rear)
● Rubber Dedicated brake hose (front and back)
● Brake pad (front and back)
* If the monoblock brake kit is installed, the brakes may squeak or the wheels may become dirty depending on the characteristics.
* Brake fluid needs to be replaced when installing.
* Processing of genuine dust cover is required.
GR quick shift lever set – 51,800 yen
The shifting stroke is shortened by about 10% compared to the genuine product. Achieves quick and reliable shift work.
Configuration
MT car
* This product does not include a shift knob.
* The feeling of operation will be slightly heavier depending on the installation.
* Be careful of shift mistakes until you get used to it after mounting.
GR 19 inch forged aluminum wheel & tire set (with security lock nut) – 680,000 yen
Size 19 × 8.0J & 215 / 35R19 Inset 48
Color Ultimate gray
GR 19 inch forged aluminum wheel & FALKEN AZENIS FK51
GR knee pad – 16,000 yen
An item that supports the driving posture when cornering and enables stable operation. The suede skin and GR logo embroidery create a sporty atmosphere in the room.
Color Ultimate gray
Contents Knee pads (for driver’s seat)
* Drilling is required.
LED room lamp set – 43,000 yen
A surface-emitting type LED room lamp set that shines evenly on the entire surface of the lens. It illuminates a wide area brightly and improves the visibility of the room.
Room lamp [Surface emission type] (2 pcs), luggage room lamp (1 pcs) set.
* The color and illuminance of the photo may differ from the actual one.
* The light may appear to flicker when the engine is started or the voltage is not stable, but this is not a product malfunction.
GR door handle protector – 680,000 yen
Not only does it prevent scratches when opening and closing the door, but it also dresses up around the door handle in a sporty manner.
Material: Resin (polyvinyl chloride)
GR Key cover – 19,300 yen
Aramid fiber is extremely thin, lightweight, and tough with a thickness of about 0.6 mm. We adopted a “twill weave” that can express the texture beautifully, and applied a matte coating that is comfortable to the touch on the surface. The aluminum bumper is precisely machined from a lump of aluminum and finished with beautifully colored alumite processing.
GR Door Stabilizer- 21,500 yen
By inserting a spacer in the gap of the striker part of the door to fill the gap, the response delay of the vehicle during steering operation is reduced. Finish with a quick response.
GR interior panel set [MT and AT ] – 48,500 yen
The marble carbon pattern is used to express the advanced and high-quality sports taste of the interior trim. In addition, the GR logo is also placed to create an indoor space that stimulates the sports mind.
Material: Resin (acrylic)
You must be logged in to post a review.
You may also like…
-
GAZOO Racing Parts for Toyota 86
¥104,000TRD body kit for Toyota 86 -
WALD Body Kit for Toyota 86
¥282,880WALD Black Bison Edition for Toyota Hilux -
Modellista for Toyota 86
¥154,648Modellista for Toyota 86
Reviews
There are no reviews yet.