Enlarge Auto Brake Hold Kit for Kit for Crown Crossover / Sport
Original price was: ¥18,000.¥16,000Current price is: ¥16,000.
Part Number: HOLD-13 ~ HOLD-15
Please select per-product shipping when placing the order. This can be shipped via economy air shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered with this shipping, we may request an additional shipping charge after the buyer places the order.
Description
Crown Crossover CROWN CROSSOVER / CROWN SPORT compatible auto brake hold kit complete coupler on
When the product is installed, the high-mount stop lamp will flash automatically in conjunction with the brake.
When you are stuck in a traffic jam or waiting at a traffic light, you can notify the following vehicles of your vehicle’s presence and help prevent unnecessary rear-end collisions.
Easy to install with the complete coupler on! Simply connect the product to the connector on the back of the high-mounted stop lamp in the rear hatch.
Of course, it is easy to remove!
What is brake hold?
After the engine starts, when the driver’s door is closed and the driver’s seat belt is fastened, pressing the brake hold switch will put the brakes into standby, and when the brakes come to a complete stop, such as when waiting at a traffic light, the brakes will be held (fixed). This feature allows you to take your foot off the brake pedal.
Unfortunately…
Brake hold is a very convenient feature that allows you to start off smoothly by turning on the accelerator without having to keep pressing the brake while waiting at a traffic light. It’s annoying to have to press the switch every time you turn it on, etc. It’s a shame because it’s such a convenient function.
That’s where the auto brake hold kit comes in!
If you install the auto brake hold kit, the brake hold function will automatically turn on every time you start the engine without having to press the HOLD button!
Easy to install with the coupler on!
Installation is completely coupler-on with connectors attached to all wiring destinations, so it can be easily installed without damaging the original wiring. Moreover, it is easy to return to the original state!
“Hold brake system” is installed in many cars sold these days.
The brakes are held in place while the car is stopped, such as when waiting at a traffic light or in traffic jams, allowing you to take your foot off the brake pedal and start smoothly by turning on the accelerator. This is a very convenient feature that allows you to relax from having to keep your foot fixed on the pedal all the time, or having to switch your foot in a hurry when the traffic light changes, but there is one drawback…
When you turn off the engine, the hold function turns off and you have to turn it on again the next time you drive, which is very troublesome.
Even though it’s the latest type of crown, why do I have to do it manually every time? Mystery is.
Am I the only one who can’t tolerate this little hassle given the convenient features? Humans are such selfish creatures…
This is a product that can eliminate such selfishness.
When I start the engine, close the driver’s door, and fasten the driver’s seat belt, the green mark indicating the hold function standby automatically lights up. After that, all you have to do is press and release the brake, and the yellow HOLD lamp lights up and you can’t move forward. The brake is held.
Afterward, you can play rock-paper-scissors or tap dance while waiting at a traffic light.
【Notes】
*If you remove your seat belt or open the driver’s door while the brake is on hold, a warning message will appear and the parking brake will be forcibly applied. Also, if the vehicle is stopped for more than 3 minutes with only the hold brake applied, the parking brake will be applied. (Equivalent to genuine specifications)
[Compatible car models]
Toyota
・Crown crossover
[Compatible models]
・6AA-AZSH35 (2.5L hybrid)
・5AA-TZSH35 (2.4L turbo hybrid)
[Compatible year]
From September 2022
・Crown Sports
[Compatible models]
・6AA-AZSH36W
[Compatible year]
From November 2023
Crown Sports PHEV Vehicle Grade RS Model: 6LA-AZSH37W is a different product, please make sure to purchase it correctly.
[Product contents]
・Wiring kit
・Installation manual
・Plastic remover
You must be logged in to post a review.
You may also like…
-
Enlarge Vehicle Speed or P Shift Auto Door Lock Kit for Yaris
Original price was: ¥17,000.¥16,000Current price is: ¥16,000.GR Yaris/Yaris/Yaris Cross -
Enlarge Engine Auto ON/OFF [Idling Stop] Canceller Kit for GR Yaris
Original price was: ¥12,000.¥11,000Current price is: ¥11,000.Compatible with GR Yaris -
Enlarge Auto Brake Hold Kit for Yaris Cross
Original price was: ¥15,000.¥13,000Current price is: ¥13,000.Compatible with Yaris/Yaris Cross
Reviews
There are no reviews yet.