Description

HONDA Vezel RV series high-mount stop lamp flashing kit

When the product is installed, the high-mount stop lamp will flash automatically in conjunction with the brake.
When you are stuck in a traffic jam or waiting at a traffic light, you can notify the following vehicles of your vehicle’s presence and help prevent unnecessary rear-end collisions.
Easy to install with a complete coupler on! Simply connect the product to the connector on the back of the high-mounted stop lamp in the rear hatch.
Of course, it is easy to remove!

Until a while ago, driving schools recommended pumping the brakes (pressing the brakes in small steps).
Older cars did not yet have ABS (anti-lock braking systems), so stepping on the pumping brakes not only prevented the tires from locking up, but also caused the brake lights to flash and alert the car behind you. It also had the effect of letting you know when to slow down.
Or, you can show your love by flashing your brake lights five times…

At the end of a traffic jam, it is common to flash your hazard lights to notify the cars behind you, but if you are not in a traffic jam, pumping your brakes ( By pressing the brakes (pressing the brakes in small steps) and flashing the brake lights, you can make the car behind you think, “Huh?”

It is very important to use the brakes and hazard warnings to warn others to avoid being involved in an accident.

No matter how carefully you drive and how conscious you are of safety, being rear-ended by a careless third party can still happen.

It’s not just cars that get dented by being dug in.
To protect your vehicle, which is your property, the safety of your passengers, and yourself, ensuring the safety of the rear of your vehicle and appealing to following vehicles is an important factor.

Even if the car behind you thinks it’s annoying to have your brake lights turned on so many times, it’s proof that you’ve succeeded in alerting them in the sense of “getting them to pay attention to your car.”

That’s where the “High Mount Stop Lamp Flashing Kit” comes in!
By installing this product, you can expect the same effect as pumping brakes, with the high-mounted stop lamp flashing just by stepping on the brake without having to be conscious of it.
In addition, since the light only flashes when the brake pedal is pressed, the light will immediately turn on normally when the light is stopped, such as when waiting at a traffic light, so it will not cause any unnecessary irritation to vehicles behind you.

In addition, the product is a complete coupler-on, and the installation location is easily accessible, so even people who are not familiar with cars can install it in just 5 minutes.
Of course, it is also easy to remove.
Just insert it between the genuine connectors, so it won’t damage the original car wiring.

■Functional explanation■
– When you step on the brake (keep stepping on it), the high-mount stop lamp flashes three times twice, then returns to the normal lighting state.
– If you take your foot off the brake while it is blinking 3 x 2 times, the blinking will stop midway, and when you press the brake again, it will start blinking 3 x 2 times again.

■Lighting pattern■
・3 blinks x 2 times, then normally on (initial), 3 blinks, then normally on, normally on (blinks OFF, same as genuine)

■Switching method■
“Start the engine, then turn on approximately once/ “Press the brake 7 times in a row at a pace of 1 second” and the lighting pattern will change. Every time you press the brake 7 times in a row, the lighting pattern will change repeatedly in the following order.
Flashes 3 times x repeats 2 times, then turns on normally
↓
After flashes 3 times, turns on normally
↓
Normally turns on

[Caution] * If you brake frequently on a slope or put your foot on the brake, the brake light will turn 7. If the light flashes several times in a row, the flashing pattern may change automatically.

■About Vehicle Inspections■
Please enter the vehicle with the lights turned back to normal when entering the vehicle during the vehicle inspection. Regarding vehicle inspections, depending on the inspector’s judgment, there is a possibility that your vehicle will not pass the vehicle inspection. We do not guarantee 100% vehicle inspection compliance. Please understand this before purchasing.
*The flashing mode of the high-mounted stop lamp in this product is intended for driving on private property such as events and racing tracks. Please note that it may be a violation if used on public roads.

■Product details■
・Wiring with connector x 1
*Installation and handling instructions are not included. Please see the images and videos on the page for installation and switching methods, and purchase only if you can install it yourself.