Sale!
HKS COLD AIR INTAKE FULL KIT for GR 86 70026-AT012
Original price was: ¥170,500.¥150,000Current price is: ¥150,000.
Part Number: 70026-AT012
Please select per-product shipping when placing the order. This can be shipped via economy air shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered with this shipping, we may request an additional shipping charge after the buyer places the order.
Description
■Features
- The air cleaner body uses the traditional high-performance air cleaner “Super Power Flow (Φ150-80 wet 2-layer)” to improve intake efficiency.
- By housing the Super Power Flow unit inside a box, the influence of hot air in the engine room can be suppressed and the intake air temperature can be kept low and stable.
- By not changing the installation position of the airflow meter from the original position, it complies with the original control, while adding a second intake duct to reduce ventilation resistance during intake.
- By adopting a clear smoke color for the upper case of the box, it subtly emphasizes the presence of superpower flow while tightening the interior of the engine room.
●Carbon suction pipe
- The material is a hot press manufacturing method using 3K * twill carbon prepreg * on the surface and UD * prepreg on the inside.
- A silicone bag is used inside the pipe to perform the curing process at high pressure and high temperature. This results in a smooth inner pipe surface and high strength. It allows air to flow smoothly while maintaining sufficient strength.
- The connection to the intake box uses silicone, which has sufficient resistance to the high temperatures found in the engine compartment. A smooth internal surface reduces intake resistance. Additionally, the core wire is placed in the center to prevent deformation caused by negative pressure and improve reliability.
* 3K: 3,000 carbon fiber
prepreg: Sheet with thermosetting resin in the fibers in advance
UD: Unidirectional carbon fiber. UD achieves high strength by laminating multiple sheets by changing the lamination direction.
●Air intake duct
- A blow-molded one-piece structure with no internal seams reduces intake resistance.
- Aiming to reduce resistance at the maximum flow rate, the narrowest part has been made equivalent to approximately Φ87.5mm, compared to the genuine equivalent of approximately Φ50mm.
- The layout is the same as the original, so you can use it safely on the street without inhaling rainwater.
You must be logged in to post a review.
You may also like…
-
BLITZ AIR FILTER LM/LMD for TOYOTA GR Yaris
Original price was: ¥8,206.¥7,800Current price is: ¥7,800.SUS POWER AIR FILTER GXPA16 -
HKS Oil Filter for GR Yaris
Original price was: ¥5,200.¥3,120Current price is: ¥3,120.will be available soon -
TOM’S New Air Cleaner “Super Ram II”
Original price was: ¥12,480.¥11,128Current price is: ¥11,128.For Toyota / Lexus
Reviews
There are no reviews yet.