Enlarge Auto Brake Hold Kit for Kit for Yaris Cross 2020~2023
Original price was: ¥18,000.¥16,000Current price is: ¥16,000.
Part Number: hold-yaris-cross
Please select per-product shipping when placing the order. This can be shipped via economy air shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered with this shipping, we may request an additional shipping charge after the buyer places the order.
Description
Crown Crossover CROWN CROSSOVER / CROWN SPORT compatible auto brake hold kit complete coupler on
What is brake hold?
After the engine has started, when the driver’s door is closed and the driver’s seat belt is fastened, pressing the brake hold switch will put the brakes into standby mode. When the vehicle comes to a complete stop, such as when waiting at a traffic light, the brakes will be held (fixed). This feature allows you to take your foot off the brake pedal.
Unfortunately…
Brake Hold is a very convenient function because you don’t have to keep pressing the brake pedal while waiting at a traffic light, and you can smoothly activate the brake hold function by turning on the accelerator. It’s a pain to have to press the switch every time you turn it on, etc. It’s a shame since it’s such a convenient function.
That’s where the auto brake hold kit comes in!
If you install the auto brake hold kit, the brake hold function will automatically turn on every time you start the engine without having to press the HOLD button!
Easy to install with the coupler on!
Installation is completely coupler-on with connectors attached to all wiring destinations, so it can be easily installed without damaging the original wiring. Moreover, it is easy to return to the original state!
“Hold brake system” is installed in many cars sold these days.
The brakes are held in place while the car is stopped, such as when waiting at a traffic light or in traffic jams, allowing you to take your foot off the brake pedal and start off smoothly with the accelerator on. This is a very convenient feature that allows you to relax from having to keep your foot fixed on the pedal all the time or having to change your foot in a hurry when the traffic light changes, but there is one drawback…
When you turn off the engine, the hold function turns off and you have to turn it on again the next time you drive, which is very troublesome.
Am I the only one who can’t tolerate this little hassle given the convenient features? Humans are such selfish creatures…
This is a product that can eliminate such selfishness.
When I start the engine, close the driver’s door, and fasten the driver’s seat belt, the green mark indicating the hold function standby automatically lights up. After that, all you have to do is press and release the brake, and the yellow HOLD lamp lights up and you can’t move forward. The brake is held.
Afterward, you can play rock-paper-scissors or tap dance while waiting at a traffic light.
【Notes】
*If you remove your seat belt or open the driver’s door while the brake is on hold, a warning message will appear and the parking brake will be forcibly applied. Also, if the vehicle is stopped for more than 3 minutes with only the hold brake applied, the parking brake will be applied. (Equivalent to genuine specifications)
*If you start the engine while in standby mode, the car’s system protection will be activated and operation of the brake hold function will not be permitted, resulting in an error message saying “Brake hold cannot be turned on due to system protection.”
In that case, you will not be able to use the functions of this product.
By removing system protection, you can use the product’s functions.
Please contact your dealer for information on how to cancel standby mode and system protection.
[Compatible car models]
Toyota
・Crown crossover
[Supported models]
5BA-MXPB10
5BA-MXPB15
6AA-MXPJ10
6AA-MXPJ15
5BA-MXPA12
*We apologize for the correction in the installation video. In the video, the Yaris Cross model was listed as “6AA-MXPA10”, but the correct number is “6AA-MXPJ10”. Best regard.
[Compatible year]
2020/08 to December 2023/12
・Yaris Cross *Compatible with all grades
[Product contents]
・Wiring kit
・Installation manual
・Plastic remover
You must be logged in to post a review.
You may also like…
-
Enlarge Vehicle Speed or P Shift Auto Door Lock Kit for Yaris
Original price was: ¥17,000.¥16,000Current price is: ¥16,000.GR Yaris/Yaris/Yaris Cross -
Enlarge Engine Auto ON/OFF [Idling Stop] Canceller Kit for GR Yaris
Original price was: ¥12,000.¥11,000Current price is: ¥11,000.Compatible with GR Yaris -
Enlarge Auto Brake Hold Kit for Yaris Cross
Original price was: ¥15,000.¥13,000Current price is: ¥13,000.Compatible with Yaris/Yaris Cross
Reviews
There are no reviews yet.